|
|
![]() |
#1 |
Member
Join Date: May 2014
Location: E TN
Posts: 473
Likes: 16
Liked 133 Times in 76 Posts
|
![]()
My 3rd gen Camaro has developed a death wobble when the wheels touch down after launch. Everything in the frt. end looks good and it's never done this before, nothing has been changed on the car since a week ago when it had no problems at all. some have said I need a steering dampner. I'll install one but is it masking another problem that needs to be corrected? why did it start all of a sudden?
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Dec 2005
Posts: 252
Likes: 304
Liked 132 Times in 27 Posts
|
![]()
Try tightening up the steering box end play. If that doesn't help Ed Quay has a nice kit that will fix it.
rod |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Nov 2008
Location: Glendora,Calif.
Posts: 1,137
Likes: 172
Liked 719 Times in 220 Posts
|
![]()
A racer out here had that happen on an '85 Camaro.The bolts holding the steering box to the subframe were loose. Tightening all three of them down fixed it.
|
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,477
Likes: 893
Liked 883 Times in 237 Posts
|
![]()
Quay kit. Also check for looseness at the pitman shaft bushing.
__________________
Tom Goldman 1500 SG , 1506 STK |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: May 2014
Location: E TN
Posts: 473
Likes: 16
Liked 133 Times in 76 Posts
|
![]()
I ordered the Quay kit and their bump steer tie rod end kit. Also found upper strut mounts were cracked, only 29 years old who would have thought? I ordered a set of the heavy steel caster/camper plates to replace the original strut mounts. I'll go over everything in the frt. and already ordered a new center link and idler arm.
|
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
EMan, you are on the correct path.
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Feb 2009
Location: Coraopolis, Pa.
Posts: 172
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Doing alignments for a few years the biggest thing I ran into was that the front subframe behind the steering box where the mounting bolts pass thru have a tendency to stress crack there....
D L Rambo....Stk 1300 |
![]() |
![]() |
![]() |
|
|