Edelbrock head accepted for Sbc in S/S ?

Kingpen · 12-19-2014, 12:35 AM

Was looking to see if any changes on my combo and seen where there are 3 or 4 edelbrock heads listed as replacements for sbc s/s.When did this happen ? .......Victor

FireSale · 12-19-2014, 02:19 AM

What year and engine? On my page for the 68 Ford, the accepted Canfield and AFR heads are listed by number at the bottom and Edelbrock by name only. Across the top the Edelbrock head numbers are entered in small type like they were an afterthought or correction.

Are they highlighted in yellow? They do that with changes.

Dale

J.R. Haddad · 12-19-2014, 04:09 AM

Victor, it happened yesterday. J.R.

Dick Butler · 12-19-2014, 10:30 AM

Good for everyone. Sponsors can get involved. Racers can get new easier to find parts. Only problem is an image thing for the "way it was" starting with all original parts. Spectators can identify the brands and support the makers of the parts..

Kingpen · 12-19-2014, 12:04 PM

All i had heard about was the Dart Iron Eagle head being approved,but I'm usually the last to know anyhow......thanks Victor

FireSale · 12-19-2014, 01:51 PM

I see that listing now. Lots of good stuff to stick on a SBC.

Dale

12-19-2014, 12:35 AM	#1
Kingpen Member Join Date: Feb 2006 Location: sooner state Posts: 105 Likes: 3 Liked 64 Times in 22 Posts	Edelbrock head accepted for Sbc in S/S ? Was looking to see if any changes on my combo and seen where there are 3 or 4 edelbrock heads listed as replacements for sbc s/s.When did this happen ? .......Victor

12-19-2014, 02:19 AM	#2
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Edelbrock head accepted for Sbc in S/S ? What year and engine? On my page for the 68 Ford, the accepted Canfield and AFR heads are listed by number at the bottom and Edelbrock by name only. Across the top the Edelbrock head numbers are entered in small type like they were an afterthought or correction. Are they highlighted in yellow? They do that with changes. Dale

12-19-2014, 04:09 AM	#3
J.R. Haddad Senior Member Join Date: Jun 2012 Posts: 773 Likes: 895 Liked 1,427 Times in 301 Posts	Re: Edelbrock head accepted for Sbc in S/S ? Victor, it happened yesterday. J.R.

12-19-2014, 10:30 AM	#4
Dick Butler VIP Member Join Date: Oct 2002 Location: Richmond Indiana Posts: 1,196 Likes: 5 Liked 32 Times in 19 Posts	Re: Edelbrock head accepted for Sbc in S/S ? Good for everyone. Sponsors can get involved. Racers can get new easier to find parts. Only problem is an image thing for the "way it was" starting with all original parts. Spectators can identify the brands and support the makers of the parts..

12-19-2014, 12:04 PM	#5
Kingpen Member Join Date: Feb 2006 Location: sooner state Posts: 105 Likes: 3 Liked 64 Times in 22 Posts	Re: Edelbrock head accepted for Sbc in S/S ? All i had heard about was the Dart Iron Eagle head being approved,but I'm usually the last to know anyhow......thanks Victor

12-19-2014, 01:51 PM	#6
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Edelbrock head accepted for Sbc in S/S ? I see that listing now. Lots of good stuff to stick on a SBC. Dale