Schubeck style lifters

TOSTO RACING · 03-29-2015, 07:08 AM

Hey guys I've got some lifters here that have a snap ring at the top like a regular old style solid lifter , but with a puck at the bottom . And I've also got one here that has no snap ring and looks like it has been machined out so it will not accept the snap ring, it also has a puck at the bottom of the lifter. Do any of you know who might have made either sets of these. Is there a better one to use than the other? Its a schubeck design just didn't know how many styles he made?

I'm looking for one more of the snap ring type lifters if anyone might have one also. These are solid lifters for a BBC .842 lifter bore.

Thanks for the help .

Jim Hanig · 03-29-2015, 04:28 PM

How many do you need, I assume 842 chevy?

TOSTO RACING · 03-29-2015, 07:23 PM

Yes Big Block Chevy 396/375 I just need one of the snap ring type.

FINESPLINE · 03-30-2015, 08:16 PM

Are you really thinking about going with the shubeck style lifter. There are a few people on here that can give you horror stories on having the puck chip or come apart and cause some serious damage. I WOULD GIVE A SHOUT OUT to find a better lifter than what you are considering. The last person I heard that hurt a motor with those lifters drives a bad azz D/S Z/28 from Louisiana. He did make a posting about it.

TOSTO RACING · 03-30-2015, 08:21 PM

Well I've got 15 of them , and the tool steel lifters coated are 1200 bucks. I've also heard that the tool steel coated lifters round cams off and the coating is peeling off ,so I have no idea what to do. I have a billet cam so there isn't many choices. Was hoping some more guys would chime in on this one. I'm not afraid to run the schubeck style with the spring pressure I'm running. I've heard the failure in this style lifter is valve float and a valve lash getting loose. But I have really no experience with these lifters so thats just what I've heard. I know a bunch of people have copied this style lifter so I was trying to find out what style I might have. I'm also not opposed to buying the coated tool steel ,but for 1200 bucks I want to know its gonna work and not round my 550 cam off lol.

FINESPLINE · 03-30-2015, 08:26 PM

John Duzac lost a motor to schubeck lifters and swore never again. There are a few people on here that can give you the combination that will work wit h your cam.

03-29-2015, 07:08 AM	#1
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 873 Likes: 828 Liked 595 Times in 172 Posts	Schubeck style lifters Hey guys I've got some lifters here that have a snap ring at the top like a regular old style solid lifter , but with a puck at the bottom . And I've also got one here that has no snap ring and looks like it has been machined out so it will not accept the snap ring, it also has a puck at the bottom of the lifter. Do any of you know who might have made either sets of these. Is there a better one to use than the other? Its a schubeck design just didn't know how many styles he made? I'm looking for one more of the snap ring type lifters if anyone might have one also. These are solid lifters for a BBC .842 lifter bore. Thanks for the help . __________________ 5664 GHI/SA CAMARO Last edited by TOSTO RACING; 03-29-2015 at 08:40 AM.

03-29-2015, 04:28 PM	#2
Jim Hanig Senior Member Join Date: Aug 2006 Location: Pukwana SD Posts: 858 Likes: 554 Liked 97 Times in 47 Posts	Re: Schubeck style lifters How many do you need, I assume 842 chevy?

03-29-2015, 07:23 PM	#3
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 873 Likes: 828 Liked 595 Times in 172 Posts	Re: Schubeck style lifters Yes Big Block Chevy 396/375 I just need one of the snap ring type. __________________ 5664 GHI/SA CAMARO

03-30-2015, 08:16 PM	#4
FINESPLINE Senior Member Join Date: Apr 2010 Location: Island of high taxes, N.Y. Posts: 541 Likes: 0 Liked 1 Time in 1 Post	Re: Schubeck style lifters Are you really thinking about going with the shubeck style lifter. There are a few people on here that can give you horror stories on having the puck chip or come apart and cause some serious damage. I WOULD GIVE A SHOUT OUT to find a better lifter than what you are considering. The last person I heard that hurt a motor with those lifters drives a bad azz D/S Z/28 from Louisiana. He did make a posting about it.

03-30-2015, 08:21 PM	#5
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 873 Likes: 828 Liked 595 Times in 172 Posts	Re: Schubeck style lifters Well I've got 15 of them , and the tool steel lifters coated are 1200 bucks. I've also heard that the tool steel coated lifters round cams off and the coating is peeling off ,so I have no idea what to do. I have a billet cam so there isn't many choices. Was hoping some more guys would chime in on this one. I'm not afraid to run the schubeck style with the spring pressure I'm running. I've heard the failure in this style lifter is valve float and a valve lash getting loose. But I have really no experience with these lifters so thats just what I've heard. I know a bunch of people have copied this style lifter so I was trying to find out what style I might have. I'm also not opposed to buying the coated tool steel ,but for 1200 bucks I want to know its gonna work and not round my 550 cam off lol. __________________ 5664 GHI/SA CAMARO Last edited by TOSTO RACING; 03-30-2015 at 08:28 PM.

03-30-2015, 08:26 PM	#6
FINESPLINE Senior Member Join Date: Apr 2010 Location: Island of high taxes, N.Y. Posts: 541 Likes: 0 Liked 1 Time in 1 Post	Re: Schubeck style lifters John Duzac lost a motor to schubeck lifters and swore never again. There are a few people on here that can give you the combination that will work wit h your cam.