carb air entry pan for the Super 10

Woodfin · 08-11-2015, 07:28 PM

is this Quick Fuel air bell a legal SS part?

http://www.quickfueltechnology.com/s...150-style.html

SSDiv6 · 08-11-2015, 08:02 PM

It's not legal.
The air cleaner rule you have to follow is the same as for Super Stock class.

AIR CLEANERS
Optional. If used, air cleaner must be OEM automotive or retain
OEM configuration. Air-cleaner base may be cut or trimmed, but
welding, bolting, riveting, epoxying, or any other form of fabrication
prohibited. Ram tubes, velocity stacks, or other than stock-type
base plates or ducting prohibited. Cooling holes prohibited in
radiator side panels, etc. Factory air cleaners and/or scoops that fit
through hood must be affixed to carburetor as per OEM only.

Geerhead55 · 08-11-2015, 09:28 PM

X2,,, that's basically a velocity stack you're looking at, Larry.
Danny Durham

MAURICE BLENDHEIM · 08-11-2015, 10:40 PM

Larry…Classic Industries Part number C695, should keep you out of trouble. MB.

Dragsinger · 08-12-2015, 04:09 AM

Maurice,

Thanks, I need a non trouble situation

Danny Ashley · 08-12-2015, 08:32 AM

Larry,
Not sure exactly what you are wanting but if you need an air cleaner base, then check out Speedway Motors' #91011062-2. At only $14.99 you can't go wrong. This is what I used to recommend to my carb customers when they asked about air cleaner bases. They also offer it with a top if you want to run a filter, #91011000. It comes with your choice if spacer 1/2, 1, or 2 inch and a stud. Hope this helps. Regards, Danny

08-11-2015, 07:28 PM	#1
Woodfin Senior Member Join Date: Sep 2006 Location: Kilgore TX Posts: 512 Likes: 8 Liked 213 Times in 88 Posts	carb air entry pan for the Super 10 is this Quick Fuel air bell a legal SS part? http://www.quickfueltechnology.com/s...150-style.html

08-11-2015, 08:02 PM	#2
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,023 Likes: 706 Liked 1,514 Times in 563 Posts	Re: carb air entry pan for the Super 10 It's not legal. The air cleaner rule you have to follow is the same as for Super Stock class. AIR CLEANERS Optional. If used, air cleaner must be OEM automotive or retain OEM configuration. Air-cleaner base may be cut or trimmed, but welding, bolting, riveting, epoxying, or any other form of fabrication prohibited. Ram tubes, velocity stacks, or other than stock-type base plates or ducting prohibited. Cooling holes prohibited in radiator side panels, etc. Factory air cleaners and/or scoops that fit through hood must be affixed to carburetor as per OEM only.

08-11-2015, 09:28 PM	#3
Geerhead55 VIP Member Join Date: Sep 2002 Location: Tacoma, Washington Posts: 1,632 Likes: 0 Liked 5 Times in 5 Posts	Re: carb air entry pan for the Super 10 X2,,, that's basically a velocity stack you're looking at, Larry. Danny Durham

08-11-2015, 10:40 PM	#4
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 565 Likes: 305 Liked 264 Times in 85 Posts	Re: carb air entry pan for the Super 10 Larry…Classic Industries Part number C695, should keep you out of trouble. MB.

08-12-2015, 04:09 AM	#5
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: carb air entry pan for the Super 10 Maurice, Thanks, I need a non trouble situation __________________ Larry Woodfin 471W

08-12-2015, 08:32 AM	#6
Danny Ashley Member Join Date: Nov 2001 Location: Marion,In. Posts: 267 Likes: 58 Liked 109 Times in 29 Posts	Re: carb air entry pan for the Super 10 Larry, Not sure exactly what you are wanting but if you need an air cleaner base, then check out Speedway Motors' #91011062-2. At only $14.99 you can't go wrong. This is what I used to recommend to my carb customers when they asked about air cleaner bases. They also offer it with a top if you want to run a filter, #91011000. It comes with your choice if spacer 1/2, 1, or 2 inch and a stud. Hope this helps. Regards, Danny