267 Chevy

Chipper Chapman · 04-27-2016, 05:51 PM

Anyone ever run One of these in stock? Seems soft at 150hp

Rsmith38 · 04-27-2016, 07:49 PM

Possibly Philbrick from Ontario? R/SA Monza record holder?

Neil Smedley · 04-27-2016, 07:57 PM

Philbrick`s is a 262 v8....different animal........Lee Tuttle from Albany Ga. runs a 267 in his 80 Camaro....classed in U/SA

brian schuetta · 04-28-2016, 05:14 AM

Would it work better in a Malibu? the engine was made from 79-81. Got one sitting here, haven't found pistons for it yet.

Billy Nees · 04-28-2016, 07:53 AM

Neat "Dime Rocket" combo! 81-82 would be the way to go. Just don't get carried away with it. Square bore and stroke, not a lot of compression and the front half of an 800 Q-Jet. Gonna have to build cylinder pressure with your cam choice and don't try to spin it too awful high. Camaro would be neat, 8.5 rear is easy and cheap. Malibu or Monte Carlo would need GN rear or aftermarket.

Mike Taylor 3601 · 04-28-2016, 02:25 PM

federal mogul did and should still have pistons,will be stock cast,maybe hypertec now.
any of piston companies could make forged versions if wanted and get add to approved list.
Federal Moguls should work fine.
Mike Taylor 3601

Dyno · 04-28-2016, 03:51 PM

Found a free 267 in the Dallas area on Craigslist. Real small valves and not much of a cam.

brian schuetta · 04-28-2016, 04:19 PM

1.375 exhausts. The dual jet throttle openings look way small, I will take a Q-Jet off the shelve and compare the primaries to the dual jet. Has anybody ever seen the specs on a stocker cam for a 267? Milder duration than a 305, I wonder how much more mild.

04-27-2016, 05:51 PM	#1
Chipper Chapman Member Join Date: Jan 2004 Location: Belmont N.S. Canada Posts: 473 Likes: 246 Liked 163 Times in 71 Posts	267 Chevy Anyone ever run One of these in stock? Seems soft at 150hp __________________ Chris Chapman 1969 Chevelle NHRA F-G/SA 1090

04-27-2016, 07:49 PM	#2
Rsmith38 Member Join Date: Mar 2011 Posts: 186 Likes: 0 Liked 28 Times in 15 Posts	Re: 267 Chevy Possibly Philbrick from Ontario? R/SA Monza record holder?

04-27-2016, 07:57 PM	#3
Neil Smedley Member Join Date: Feb 2002 Location: Phoenix, AZ Posts: 163 Likes: 32 Liked 22 Times in 7 Posts	Re: 267 Chevy Philbrick`s is a 262 v8....different animal........Lee Tuttle from Albany Ga. runs a 267 in his 80 Camaro....classed in U/SA

04-28-2016, 05:14 AM	#4
brian schuetta Member Join Date: Apr 2005 Location: san antonio tx Posts: 259 Likes: 5 Liked 28 Times in 15 Posts	Re: 267 Chevy Would it work better in a Malibu? the engine was made from 79-81. Got one sitting here, haven't found pistons for it yet.

04-28-2016, 07:53 AM	#5
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,473 Likes: 3,564 Liked 7,595 Times in 1,718 Posts	Re: 267 Chevy Neat "Dime Rocket" combo! 81-82 would be the way to go. Just don't get carried away with it. Square bore and stroke, not a lot of compression and the front half of an 800 Q-Jet. Gonna have to build cylinder pressure with your cam choice and don't try to spin it too awful high. Camaro would be neat, 8.5 rear is easy and cheap. Malibu or Monte Carlo would need GN rear or aftermarket. __________________ Billy Nees 1188 STK, SS I'm OK..........it's everybody else.

04-28-2016, 02:25 PM	#6
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,349 Likes: 298 Liked 248 Times in 87 Posts	Re: 267 Chevy federal mogul did and should still have pistons,will be stock cast,maybe hypertec now. any of piston companies could make forged versions if wanted and get add to approved list. Federal Moguls should work fine. Mike Taylor 3601

04-28-2016, 03:51 PM	#7
Dyno Senior Member Join Date: Dec 2002 Posts: 905 Likes: 1,098 Liked 659 Times in 196 Posts	Re: 267 Chevy Found a free 267 in the Dallas area on Craigslist. Real small valves and not much of a cam.

04-28-2016, 04:19 PM	#8
brian schuetta Member Join Date: Apr 2005 Location: san antonio tx Posts: 259 Likes: 5 Liked 28 Times in 15 Posts	Re: 267 Chevy 1.375 exhausts. The dual jet throttle openings look way small, I will take a Q-Jet off the shelve and compare the primaries to the dual jet. Has anybody ever seen the specs on a stocker cam for a 267? Milder duration than a 305, I wonder how much more mild.