MP's Final Round Dial at "the Bend"??

Dave Turner · 07-22-2007, 09:14 PM

Who was there? 11.38?......huh????

Car#-Driver(Opp'nt)-RT-----ET-- Speed-----Car#-Driver(Opp'nt)-RT-----ET-- Speed
1 Myron Piatek 535 Rick Baehr
E6 0.012 11.833 109.73 ****WINNER**** 0.001 12.572 82.45
J/CM Dial: 11.38 (+/-): 0.453 G/FIA Dial: 12.35 (+/-): 0.222
Prior rounds:
E5 (J KAEKEL JR ) 0.021 11.802 0.012 0.036 12.411 0.061
E4 (M LEOPOLD ) 0.002 11.800 -0.010 (J DAY ) 0.025 12.365 0.015
E3 (N FOLK ) 0.007 11.834 0.004 (R SHAW ) 0.030 12.349 -0.001
E2 (T KNOTT ) 0.031 11.847 0.027 (C BLEZIEN ) 0.004 12.373 0.033
E1 (B GRUBBS ) 0.012 11.782 0.002 (R WILKINS ) 0.038 12.324 -0.006
Qualified: #26 11.782 -0.518 #14 12.295 -0.855

shooter66 · 07-22-2007, 10:46 PM

Dude save the bandwidth....its the DRIVERS responsibility to check his/her dial PERIOD!!!!!!

shooter......besides slick was .001 and hes the baddest stripe driver around right now!

76 RACER · 07-23-2007, 12:28 AM

Hey Scott this aint DRR! Nice job this weekend in what you did. Just remember the decimal point. I think you know where it goes. Good luck and enjoy......

Jeremy1374 · 07-23-2007, 07:10 AM

The 11.38 dial had to be a misprint. Myron didnt become the world champ by not paying attention to the details. If he dialed an 83 and they put a 38 in the computer and he didnt notice, I'd be surprised. Great light by Rick. Is this the Rick Beahr that won the summit super series?

Michael Beard · 07-23-2007, 09:40 AM

He missed it, unfortunately. That would've been a h*ll of a race.

Yup, that's the '05 Summit World Champion, Ricky Baehr... who is 28-2 in the SWC again this year! One bad dude, and a really nice guy to boot.

Jeremy1374 · 07-24-2007, 07:06 AM

That just goes to prove we are all human!!

Stacie J. Ridings · 07-24-2007, 04:37 PM

I like the dial-in boards as you do the burn-out, because I will look at it then. I also like having my husband on the starting line to check for water, oil, and correct dial-ins. Once the burn out is over, I'm focused on the staging process and getting a good light. Congrats on the Runner up Myron, sorry you lost this way.

FlyingW · 07-24-2007, 04:45 PM

Got to have some one checking MP!!!!

Beth Denysenko · 07-24-2007, 06:26 PM

Myron Myron-a-vich!!!!! The man!!!!! Are you coming to Martin? Hope so!

I ran this weekend at the Indy points race - only my second race - and one of the "must do's" that Alex went over with me before first round (which I won thank you very much!

)was to pay attention to the dial in board at the beginning of the burnout box because there are still humans running the machines and mistakes happen. I couldn't believe the next day we were reading about your foible in Ontario with this very thing. We are so sorry to hear about this and can pretty surely guarantee it will never happen to you again. Nor will it ever happen to me as I have learned from Alex and had it hammered home by your experience.

Please know this totally takes NOTHING away from the fact that you made it to yet another final round. CONGRATULATIONS from Moneymaker Racing!!!! Hope to see your smiling face in a few weeks!

Slick Rick 3x9x · 07-24-2007, 10:19 PM

Myron, its a bummer about the whole dial in thing...I do understand your frustration!! I was hoping to get a chance to mix it up with you on both ends!! However, the Mustang was pretty stuck the entire day....incrementals show im on w/.009 or in by .010, so there wasn't really much room to get in...

It was nice meeting you and I hope to meet up with you again for a re-match!! Maybe Martin???

Rick Baehr

07-23-2007, 12:28 AM	#3
76 RACER Member Join Date: Mar 2007 Posts: 247 Likes: 0 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? Hey Scott this aint DRR! Nice job this weekend in what you did. Just remember the decimal point. I think you know where it goes. Good luck and enjoy......

07-23-2007, 07:10 AM	#4
Jeremy1374 Member Join Date: Jun 2007 Posts: 136 Likes: 207 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? The 11.38 dial had to be a misprint. Myron didnt become the world champ by not paying attention to the details. If he dialed an 83 and they put a 38 in the computer and he didnt notice, I'd be surprised. Great light by Rick. Is this the Rick Beahr that won the summit super series?

07-23-2007, 09:40 AM	#5
Michael Beard VIP Member Join Date: Sep 2002 Location: Columbus, OH Posts: 4,060 Likes: 0 Liked 13 Times in 9 Posts	Re: MP's Final Round Dial at "the Bend"?? He missed it, unfortunately. That would've been a h*ll of a race. Yup, that's the '05 Summit World Champion, Ricky Baehr... who is 28-2 in the SWC again this year! One bad dude, and a really nice guy to boot. __________________ Michael Beard - NHRA/IHRA 3216 S/SS

07-24-2007, 07:06 AM	#6
Jeremy1374 Member Join Date: Jun 2007 Posts: 136 Likes: 207 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? That just goes to prove we are all human!!

07-24-2007, 04:37 PM	#7
Stacie J. Ridings Member Join Date: Jun 2007 Location: Columbus, NC Posts: 143 Likes: 15 Liked 15 Times in 4 Posts	Re: MP's Final Round Dial at "the Bend"?? I like the dial-in boards as you do the burn-out, because I will look at it then. I also like having my husband on the starting line to check for water, oil, and correct dial-ins. Once the burn out is over, I'm focused on the staging process and getting a good light. Congrats on the Runner up Myron, sorry you lost this way. __________________ Stacie J. Ridings 2028 STK

07-22-2007, 09:14 PM	#1
Dave Turner VIP Member Join Date: Oct 2005 Location: Schomberg, ON, Canada Posts: 1,222 Likes: 1,606 Liked 364 Times in 138 Posts	MP's Final Round Dial at "the Bend"?? Who was there? 11.38?......huh???? Car#-Driver(Opp'nt)-RT-----ET-- Speed-----Car#-Driver(Opp'nt)-RT-----ET-- Speed 1 Myron Piatek 535 Rick Baehr E6 0.012 11.833 109.73 **WINNER** 0.001 12.572 82.45 J/CM Dial: 11.38 (+/-): 0.453 G/FIA Dial: 12.35 (+/-): 0.222 Prior rounds: E5 (J KAEKEL JR ) 0.021 11.802 0.012 0.036 12.411 0.061 E4 (M LEOPOLD ) 0.002 11.800 -0.010 (J DAY ) 0.025 12.365 0.015 E3 (N FOLK ) 0.007 11.834 0.004 (R SHAW ) 0.030 12.349 -0.001 E2 (T KNOTT ) 0.031 11.847 0.027 (C BLEZIEN ) 0.004 12.373 0.033 E1 (B GRUBBS ) 0.012 11.782 0.002 (R WILKINS ) 0.038 12.324 -0.006 Qualified: #26 11.782 -0.518 #14 12.295 -0.855 __________________ Dave Turner SS/GT #1153

07-22-2007, 10:46 PM	#2
shooter66 Junior Member Join Date: Jul 2003 Posts: 50 Likes: 0 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? Dude save the bandwidth....its the DRIVERS responsibility to check his/her dial PERIOD!!!!!! shooter......besides slick was .001 and hes the baddest stripe driver around right now!

07-24-2007, 04:45 PM	#8
FlyingW Member Join Date: Apr 2007 Location: Frostproof, Fl. Posts: 450 Likes: 0 Liked 1 Time in 1 Post	Re: MP's Final Round Dial at "the Bend"?? Got to have some one checking MP!!!!

07-24-2007, 06:26 PM	#9
Beth Denysenko Live Reporter Join Date: Jun 2007 Location: NW Indiana Posts: 426 Likes: 0 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? Myron Myron-a-vich!!!!! The man!!!!! Are you coming to Martin? Hope so! I ran this weekend at the Indy points race - only my second race - and one of the "must do's" that Alex went over with me before first round (which I won thank you very much! )was to pay attention to the dial in board at the beginning of the burnout box because there are still humans running the machines and mistakes happen. I couldn't believe the next day we were reading about your foible in Ontario with this very thing. We are so sorry to hear about this and can pretty surely guarantee it will never happen to you again. Nor will it ever happen to me as I have learned from Alex and had it hammered home by your experience. Please know this totally takes NOTHING away from the fact that you made it to yet another final round. CONGRATULATIONS from Moneymaker Racing!!!! Hope to see your smiling face in a few weeks! __________________ Beth Denysenko P/SA 330 www.moneymakerracing.net

07-24-2007, 10:19 PM	#10
Slick Rick 3x9x Junior Member Join Date: Jul 2007 Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	Re: MP's Final Round Dial at "the Bend"?? Myron, its a bummer about the whole dial in thing...I do understand your frustration!! I was hoping to get a chance to mix it up with you on both ends!! However, the Mustang was pretty stuck the entire day....incrementals show im on w/.009 or in by .010, so there wasn't really much room to get in... It was nice meeting you and I hope to meet up with you again for a re-match!! Maybe Martin??? Rick Baehr Last edited by Slick Rick 3x9x; 07-24-2007 at 10:21 PM.