BB Mopar 440/ Max Wedge Street/Bracket or Stock Eliminator

Max Wedge · 03-29-2017, 02:33 AM

Manley H-beam rods with ARP 2000 bolts $450 set

Manley billet I beam rods with ARP 2000 bolts $800 set

CP 1963 426 Max Wedge low compression pistons M13CP +.060 with spares, pins and rings $550 for all

CP 1964 426 Max Wedge high compression pistons M3CP +.060, with new spare, pins and rings $550 for all

440 cast iron crank, internal balanced with Mallory, cryogenic treated, standard mains and 3.757 stroke .010 rods with fresh magnafluxed and polished. $450.00

Standard coated main bearings 119M Federal Mogul off above crank, literally like new $40

.010 coated rod bearings-new in box CB527HNXD-10 $130

Fully machined and ready to wash and build 413 Industrial block 4.316 bore with fresh torque plate hone. Block was in A/SA Max Wedge car for past 6 years. No issues. 1/2 filled, bushed lifter bores, oil gallery and windage modifications, ARP main studs, coated cam bearings, decked and align honed. Run as is or take bores +.004 more for a standard bore 440. $2,200

New and used stocker Max Wedge camshafts. All are solid lifter cams, have Comp, Crane and Bullet like new condition .
$100 each for cast cams .509 and .520 lift
$525 for billet dual swap firing order shaft .509 lift

Shubeck flat solid .904 ceramic puck lifters SOLD!

Spend 1,500 get 10% off
Spend 3,500 get 20% off

Call or text (330) 418-0490 or email mwedge426@aol.com

Max Wedge · 03-30-2017, 06:17 AM

Lifters are sold.Thanks Classracer.com!

Max Wedge · 04-08-2017, 11:44 AM

Both sets of Manley rods are gone.
Thanks Classracer.com!

03-29-2017, 02:33 AM	#1
Max Wedge Junior Member Join Date: Oct 2002 Posts: 24 Likes: 0 Liked 0 Times in 0 Posts	BB Mopar 440/ Max Wedge Street/Bracket or Stock Eliminator Manley H-beam rods with ARP 2000 bolts $450 set Manley billet I beam rods with ARP 2000 bolts $800 set CP 1963 426 Max Wedge low compression pistons M13CP +.060 with spares, pins and rings $550 for all CP 1964 426 Max Wedge high compression pistons M3CP +.060, with new spare, pins and rings $550 for all 440 cast iron crank, internal balanced with Mallory, cryogenic treated, standard mains and 3.757 stroke .010 rods with fresh magnafluxed and polished. $450.00 Standard coated main bearings 119M Federal Mogul off above crank, literally like new $40 .010 coated rod bearings-new in box CB527HNXD-10 $130 Fully machined and ready to wash and build 413 Industrial block 4.316 bore with fresh torque plate hone. Block was in A/SA Max Wedge car for past 6 years. No issues. 1/2 filled, bushed lifter bores, oil gallery and windage modifications, ARP main studs, coated cam bearings, decked and align honed. Run as is or take bores +.004 more for a standard bore 440. $2,200 New and used stocker Max Wedge camshafts. All are solid lifter cams, have Comp, Crane and Bullet like new condition . $100 each for cast cams .509 and .520 lift $525 for billet dual swap firing order shaft .509 lift Shubeck flat solid .904 ceramic puck lifters SOLD! Spend 1,500 get 10% off Spend 3,500 get 20% off Call or text (330) 418-0490 or email mwedge426@aol.com Last edited by Max Wedge; 03-30-2017 at 06:21 AM.

03-30-2017, 06:17 AM	#2
Max Wedge Junior Member Join Date: Oct 2002 Posts: 24 Likes: 0 Liked 0 Times in 0 Posts	Re: BB Mopar 440/ Max Wedge Street/Bracket or Stock Eliminat Lifters are sold.Thanks Classracer.com!

04-08-2017, 11:44 AM	#3
Max Wedge Junior Member Join Date: Oct 2002 Posts: 24 Likes: 0 Liked 0 Times in 0 Posts	Re: BB Mopar 440/ Max Wedge Street/Bracket or Stock Eliminat Both sets of Manley rods are gone. Thanks Classracer.com!