LS Hydraulic Rollers

Mark Yacavone · 01-22-2018, 06:25 PM

I'm in need of 12 of the Chevrolet GM Performance lifters for a V6 project.
Part # 88958689
All I've found is sets of 16 (Scoggins-Dickey, etc.)
These could be take outs from a S/S engine, as long as they're new.
Any ideas /suggestions?
Thanks in advance.
602-769-0346
myac455@gmail.com

MR DERBY CITY · 01-22-2018, 07:41 PM

Quote:

Originally Posted by Mark Yacavone

I'm in need of 12 of the Chevrolet GM Performance lifters for a V6 project.
Part # 88958689
All I've found is sets of 16 (Scoggins-Dickey, etc.)
These could be take outs from a S/S engine, as long as they're new.
Any ideas /suggestions?
Thanks in advance.
602-769-0346
myac455@gmail.com

Yes I have a suggestion.....buy the 16 and you will have 4 spares,.....NEXT PROBLEM.......

Mark Yacavone · 01-22-2018, 08:29 PM

For...??? Wall ornaments?
Thanks for the btt

Bob Shaw · 01-23-2018, 07:59 PM

Looks like a V/SA project.

Mark Yacavone · 01-23-2018, 09:30 PM

Quote:

Originally Posted by Bob Shaw

Looks like a V/SA project.

It does, doesn't it? But it's not. Of course that would be V/Stick anyway.
No, it's a 231 Buick. Same roller from the GM parts bin.

ss3011 · 01-24-2018, 09:23 AM

Just an FYI , I have been rebuilding a 3800 for a Firebird street car and discovered that while the lifters look the same between the 3800 and the Chevy lifters , the pushrod seat is different . You will need about a .100 shorter pushrod if you use a Chevy lifter .

01-22-2018, 06:25 PM	#1
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,789 Likes: 2,881 Liked 5,077 Times in 1,935 Posts	LS Hydraulic Rollers I'm in need of 12 of the Chevrolet GM Performance lifters for a V6 project. Part # 88958689 All I've found is sets of 16 (Scoggins-Dickey, etc.) These could be take outs from a S/S engine, as long as they're new. Any ideas /suggestions? Thanks in advance. 602-769-0346 myac455@gmail.com __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

01-22-2018, 08:29 PM	#3
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,789 Likes: 2,881 Liked 5,077 Times in 1,935 Posts	Re: LS Hydraulic Rollers For...??? Wall ornaments? Thanks for the btt __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

01-23-2018, 07:59 PM	#4
Bob Shaw Member Join Date: Jan 2002 Location: Sedalia, Mo Posts: 435 Likes: 318 Liked 295 Times in 60 Posts	Re: LS Hydraulic Rollers Looks like a V/SA project. __________________ Bob Shaw V/SA 515

01-24-2018, 09:23 AM	#6
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 908 Likes: 70 Liked 238 Times in 113 Posts	Re: LS Hydraulic Rollers Just an FYI , I have been rebuilding a 3800 for a Firebird street car and discovered that while the lifters look the same between the 3800 and the Chevy lifters , the pushrod seat is different . You will need about a .100 shorter pushrod if you use a Chevy lifter .