Have a question for the J througm M cars running small block

David Lee · 02-11-2018, 09:57 PM

Have a question for the J througm M cars running small blocks. What axles are you running and do you have them gun drilled and hubs milled down to the min.

Thanks

GTX JOHN · 02-12-2018, 03:57 AM

No Milling or gun drilling on our cars.......
Not enough Bang for the Buck on our Budget.

If money is not a big object......Get them and all the ceramic
bearings you can find!

Set N/SA National in 86 Dodge PU (360)

Plus O/SA in Dodge Aspen Wagon (318)

Without that stuff......Our money mostly spent under the hood!

David Lee · 02-12-2018, 04:38 AM

Quote:

Originally Posted by GTX JOHN

No Milling or gun drilling on our cars.......
Not enough Bang for the Buck on our Budget.

If money is not a big object......Get them and all the ceramic
bearings you can find!

Set N/SA National in 86 Dodge PU (360)

Plus O/SA in Dodge Aspen Wagon (318)

Without that stuff......Our money mostly spent under the hood!

thanks John, later i am going to see if you have any stocker heads that will work on my 273

GTX JOHN · 02-14-2018, 09:12 PM

I have 150 sets of heads.....Should have whatever part # you need.!
Just sold a couple sets 318/273 Heads to the Loge Family.

CJ McDonald 9564 · 02-15-2018, 03:55 PM

Gun drilled and star flanged because a 305 needs all the help it can get.

David Lee · 02-15-2018, 06:27 PM

Quote:

Originally Posted by CJ McDonald 9564

Gun drilled and star flanged because a 305 needs all the help it can get.

i am running an engine even smaller

02-11-2018, 09:57 PM	#1
David Lee VIP Member Join Date: Oct 2007 Posts: 1,168 Likes: 487 Liked 346 Times in 126 Posts	Have a question for the J througm M cars running small block Have a question for the J througm M cars running small blocks. What axles are you running and do you have them gun drilled and hubs milled down to the min. Thanks

02-12-2018, 03:57 AM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,736 Likes: 2,808 Liked 2,488 Times in 698 Posts	Re: Have a question for the J througm M cars running small b No Milling or gun drilling on our cars....... Not enough Bang for the Buck on our Budget. If money is not a big object......Get them and all the ceramic bearings you can find! Set N/SA National in 86 Dodge PU (360) Plus O/SA in Dodge Aspen Wagon (318) Without that stuff......Our money mostly spent under the hood! __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 02-12-2018 at 04:04 AM.

02-14-2018, 09:12 PM	#4
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,736 Likes: 2,808 Liked 2,488 Times in 698 Posts	Re: Have a question for the J througm M cars running small b I have 150 sets of heads.....Should have whatever part # you need.! Just sold a couple sets 318/273 Heads to the Loge Family. __________________ John Irving 741 Stock 741 Super Stock

02-15-2018, 03:55 PM	#5
CJ McDonald 9564 Junior Member Join Date: Oct 2012 Posts: 46 Likes: 60 Liked 11 Times in 6 Posts	Re: Have a question for the J througm M cars running small b Gun drilled and star flanged because a 305 needs all the help it can get.