Source for metric trans race parts

e vassar · 03-18-2019, 10:55 PM

I have a very good local trans builder who has been building P/G,s turbo,s etc for years. He has rebuilt some metric,s for street cars,and at my urging has agreed to try his hand at a race version. So I'm trying to find us a source for alum drums,billet stuff etc. I called Sepanek and he told me he doesn't sell any parts right now. This will be in LT1 stocker...thanks

MR DERBY CITY · 03-18-2019, 11:09 PM

Leo Glasbrenner (remac transmissions) is your best bet. He is located in California, I don’t have his contact info....

SSDiv6 · 03-18-2019, 11:19 PM

Check the following:

https://www.scottmcclayengineering.c...nsmission.html

https://http://www.turboaction.com

NATCO has an SFI approved bellhousing:

http://natcotrans.com/performance.html

MR DERBY CITY · 03-19-2019, 12:08 AM

Scott McClay builds a great M 200 trans, however, he will not sell you an aluminum drum/gear set for a trans that you did not purchase from him....

SSGN · 03-19-2019, 06:24 AM

Quote:

Originally Posted by MR DERBY CITY

Scott McClay builds a great M 200 trans, however, he will not sell you an aluminum drum/gear set for a trans that you did not purchase from him....

I purchased his drum for my 200R4 and the quality is much better than others I have used in the past.

J.R. Haddad · 03-19-2019, 11:53 AM

Wudarczyk Performance Engineering 785-842-0865, ask for Tim.
I have run their stuff for 3 years with no problem. Great workmanship
on their drums & aluminum pieces. J.R.

MR DERBY CITY · 03-19-2019, 01:28 PM

Quote:

Originally Posted by J.R. Haddad

Wudarczyk Performance Engineering 785-842-0865, ask for Tim.
I have run their stuff for 3 years with no problem. Great workmanship
on their drums & aluminum pieces. J.R.

Another good option. I have heard nothing but good things about Tim and his tranny work.....Kansas is a little closer to Texas than California....LOL....

03-18-2019, 10:55 PM	#1
e vassar Member Join Date: Jul 2015 Posts: 382 Likes: 67 Liked 271 Times in 107 Posts	Source for metric trans race parts I have a very good local trans builder who has been building P/G,s turbo,s etc for years. He has rebuilt some metric,s for street cars,and at my urging has agreed to try his hand at a race version. So I'm trying to find us a source for alum drums,billet stuff etc. I called Sepanek and he told me he doesn't sell any parts right now. This will be in LT1 stocker...thanks

03-18-2019, 11:09 PM	#2
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,648 Likes: 1,085 Liked 8,021 Times in 1,526 Posts	Re: Source for metric trans race parts Leo Glasbrenner (remac transmissions) is your best bet. He is located in California, I don’t have his contact info....

03-18-2019, 11:19 PM	#3
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,045 Likes: 712 Liked 1,593 Times in 583 Posts	Re: Source for metric trans race parts Check the following: https://www.scottmcclayengineering.c...nsmission.html https://http://www.turboaction.com NATCO has an SFI approved bellhousing: http://natcotrans.com/performance.html

03-19-2019, 12:08 AM	#4
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,648 Likes: 1,085 Liked 8,021 Times in 1,526 Posts	Re: Source for metric trans race parts Scott McClay builds a great M 200 trans, however, he will not sell you an aluminum drum/gear set for a trans that you did not purchase from him....

03-19-2019, 11:53 AM	#6
J.R. Haddad Senior Member Join Date: Jun 2012 Posts: 786 Likes: 940 Liked 1,470 Times in 308 Posts	Re: Source for metric trans race parts Wudarczyk Performance Engineering 785-842-0865, ask for Tim. I have run their stuff for 3 years with no problem. Great workmanship on their drums & aluminum pieces. J.R.