|
|
![]() |
#1 |
Junior Member
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 97
Likes: 23
Liked 43 Times in 25 Posts
|
![]()
Hi ,
what would be considered best oil pan gasket for a 440 mopar ? Milodon tin oil pan in a 68 Satellite . I have used cork/rubber , a couple bolts loosen and it weeps . Even with loctite or silicone on threads . I have the Felpro #1808 , rubber/fibre core and #1834 steel core . Preferences ? I am using a World iron block . Thanks . Tex |
![]() |
![]() |
![]() |
#2 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,629
Likes: 1,919
Liked 10,678 Times in 2,221 Posts
|
![]()
Before damper and flex plate is in stalled and after pan is installed with any gasket, I put silicone all around the outside of the block/ pan joint.
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Apr 2018
Location: Dunnellon, FL
Posts: 75
Likes: 158
Liked 109 Times in 38 Posts
|
![]()
The last one I used when I had my BB Mopar was a nylon one that had the windage tray built in. They make stroker version also. Never had a leak with it.
https://www.summitracing.com/parts/m.../make/chrysler
__________________
Al Wilson NSS 7160 W201 stock |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 97
Likes: 23
Liked 43 Times in 25 Posts
|
![]()
thanks guys .
Larry its in the car so cant go to that level . Al will look into those , may not work as i use a road race pan ? Tex |
![]() |
![]() |
![]() |
#5 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,629
Likes: 1,919
Liked 10,678 Times in 2,221 Posts
|
![]()
If you want to you can. Drop the drag link and trans. Remove flex plate and damper. While it’s off check a bearing or too. Clean and resemble. Not a piece of cake but doable.
|
![]() |
![]() |
Liked |
![]() |
#6 |
Junior Member
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 97
Likes: 23
Liked 43 Times in 25 Posts
|
![]()
wowser . no way Jose' !.
Thanks Larry but i might pass on that . I actually swapped in my transbrake transmission only 3 weeks ago . Had the pan off yesterday . I think its mostly wicking down a couple of bolts that line up with cap cross bolts . No time to check bearings needed to get home . Its my daily street/strip satellite . Tex |
![]() |
![]() |
![]() |
#7 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,629
Likes: 1,919
Liked 10,678 Times in 2,221 Posts
|
![]()
Sounds like a fun ride.
|
![]() |
![]() |
![]() |
|
|