Comp Cams DLC Hydraulic Flat Tappet Lifter

[Stan Weiss]

Has anyone seen or used these? If so any feedback?


https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf


Stan

[Glenn Briglio]

Are these available?

[john ancona]

Originally Posted by Stan Weiss

Has anyone seen or used these? If so any feedback?


https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf


Stan

Two key factors ,at what valve seat pressure ,and the open pressure seem to be missing in their statement , were lifters tested at around 200 lbs. on the seat ,and for how long were they tested ,was the cam used a stock eliminator cam ,for me I would ask a lot more questions before I put them in my engine

[MR DERBY CITY]

Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….

[nolongerracing]

Originally Posted by MR DERBY CITY

Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….

And from the same company that tells you "not to run a coated lifter on a cast cam"!!

[Billy Hampton]

That's each. $1920 for a set of 16.

[340Cuda]

Jegs shows they would ship from the manufacture 1/24 "pending manufacturing availability, but as we all know that does not always happen, $119.95 for 16.

With "pro shop" discount $112.75.

[MR DERBY CITY]

Originally Posted by billy hampton

that's each. $1920 for a set of 16.

damn

[Rob Petrie E395]

Originally Posted by Billy Hampton

That's each. $1920 for a set of 16.

I guess I’m lucky in this case. I’ve got a factory roller cam car. But look at what it costs to do this. If your already in it. What’s $2000 more to keep going. Everyone just has to decide for themselves where that line of spending vs worth it is. Financially it’s dumb to just be involved for 99% of us.

[mnmaxwedge]

Originally Posted by Billy Hampton

That's each. $1920 for a set of 16.

The part # is 812D-16. That means a set of 16. I don't know where you come up with your price. Keep in mind that these lifters only have the
DLC coating on the lifter face, thus keeping costs down. We have had so many issues where I work with soft lifters and lifters with no crown. We were able to be a large inventory of the old Delphi lifters when we heard that they were discontined. At one time I think we had close to 8000 lifters but once word got out they sold out. It's kind of sad but I have a few friends that have Rockwell tester and we batch test most of our lifters now. The new Comp lifters fill a demand out there. We have about 25 sets left right now. Supply isn't supposed to be a problem.