Needed - LS1 aluminum torque plate

RJ · 03-06-2010, 04:47 PM

Needed - LS1 aluminum torque plate, as close to 3.980" bore as possible, but not under.

Thanks

Mike Fuller · 03-09-2010, 07:30 AM

Have you checked with BHJ? I think they will make you one of these.

Dyno · 03-09-2010, 04:29 PM

I have one, where are you at. Dyno

RJ · 03-12-2010, 05:29 PM

I'm in Charlotte. I've seen the BHJ, I can't justify the 500+ bucks for just one use.

Thanks, RJ

csjta · 03-12-2010, 06:08 PM

I was told Ford Small Block is the same or very close

RJ · 03-13-2010, 01:54 PM

Quote:

Originally Posted by csjta

I was told Ford Small Block is the same or very close

Bolt holes are in about the same place, bore centers are different, won't stress the top of the cylinders the same.

Dyno · 03-18-2010, 08:08 PM

Find a plate yet? I have one. Dyno

RJ · 03-19-2010, 07:24 PM

Quote:

Originally Posted by Dyno

Find a plate yet? I have one. Dyno

I don't have one yet Dan, what do you need for it?

Thanks

Dyno · 03-21-2010, 05:56 PM

The plate is over $550.00 from BHJ. I used it 4 or 5 times, I would sell for $400.00 plus shipping. Let me know. For sale to anyone who needs one. 763-227-3366 or dyno5583@aol.com

03-06-2010, 04:47 PM	#1
RJ Member Join Date: Oct 2002 Posts: 248 Likes: 0 Liked 0 Times in 0 Posts	Needed - LS1 aluminum torque plate Needed - LS1 aluminum torque plate, as close to 3.980" bore as possible, but not under. Thanks

03-09-2010, 07:30 AM	#2
Mike Fuller Senior Member Join Date: Jun 2007 Posts: 951 Likes: 560 Liked 198 Times in 79 Posts	Re: Needed - LS1 aluminum torque plate Have you checked with BHJ? I think they will make you one of these. __________________ Mike Fuller 396 STK 3961 SS

03-09-2010, 04:29 PM	#3
Dyno Senior Member Join Date: Dec 2002 Posts: 916 Likes: 1,137 Liked 685 Times in 204 Posts	Re: Needed - LS1 aluminum torque plate I have one, where are you at. Dyno

03-12-2010, 05:29 PM	#4
RJ Member Join Date: Oct 2002 Posts: 248 Likes: 0 Liked 0 Times in 0 Posts	Re: Needed - LS1 aluminum torque plate I'm in Charlotte. I've seen the BHJ, I can't justify the 500+ bucks for just one use. Thanks, RJ

03-12-2010, 06:08 PM	#5
csjta Junior Member Join Date: Jul 2005 Location: Richmond, VA Posts: 66 Likes: 35 Liked 0 Times in 0 Posts	Re: Needed - LS1 aluminum torque plate I was told Ford Small Block is the same or very close

03-18-2010, 08:08 PM	#7
Dyno Senior Member Join Date: Dec 2002 Posts: 916 Likes: 1,137 Liked 685 Times in 204 Posts	Re: Needed - LS1 aluminum torque plate Find a plate yet? I have one. Dyno

03-21-2010, 05:56 PM	#9
Dyno Senior Member Join Date: Dec 2002 Posts: 916 Likes: 1,137 Liked 685 Times in 204 Posts	Re: Needed - LS1 aluminum torque plate The plate is over $550.00 from BHJ. I used it 4 or 5 times, I would sell for $400.00 plus shipping. Let me know. For sale to anyone who needs one. 763-227-3366 or dyno5583@aol.com