700 CI 11 Degree 2-Stage Motor

MRT · 05-18-2011, 09:58 AM

700 cubic inch nitrous motor
Aluminum Donovan 11.625" Block 4.84 bore spacing
11 degree Dart Heads
2 stages Speedtech Nitrous foggers one hard line, one soft line
Speedtech Fuel system one regulator for carbs and nitrous systems.
Speedtech plumbed fuel system
T&D shaft rockers
Jesel Belt Drive
GRP Aluminum Rods
CP Nitrous Pistons
Comp Camshaft
Moroso Dry Sump pump
Brand New Stef Oil Pan
Hogans Sheet Metal intake
APD 1150 Carbs
Front Mount MSD Distributor
MSD Crank Trigger
Moroso Vac Pump
Comp .904 lifters

This motor was originaly built by Dave Slatten of Ft. Collins, CO (www.slattenracingengines.com). It has approximatly 40 runs since complete rebuild. New rods, pistons, valves, springs, lifters. Only sprayed both systems once and ran 6.97 at 197 in a #2500 door car with a very conservative tune-up. It dynoed 1300 on Slatten's dyno and is set up for lots of nitrous. Also have (2) spare pistons and a set of push rods that come with the motor.

See RacingJunk ad #2154363

Price is $21,000 and will split delivery cost to ship.

This motor has been well maintained and cared for. Please call with any questions. Thank You

Max Tafoya Jr.
505-280-7467

05-18-2011, 09:58 AM	#1
MRT Junior Member Join Date: Nov 2008 Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	700 CI 11 Degree 2-Stage Motor 700 cubic inch nitrous motor Aluminum Donovan 11.625" Block 4.84 bore spacing 11 degree Dart Heads 2 stages Speedtech Nitrous foggers one hard line, one soft line Speedtech Fuel system one regulator for carbs and nitrous systems. Speedtech plumbed fuel system T&D shaft rockers Jesel Belt Drive GRP Aluminum Rods CP Nitrous Pistons Comp Camshaft Moroso Dry Sump pump Brand New Stef Oil Pan Hogans Sheet Metal intake APD 1150 Carbs Front Mount MSD Distributor MSD Crank Trigger Moroso Vac Pump Comp .904 lifters This motor was originaly built by Dave Slatten of Ft. Collins, CO (www.slattenracingengines.com). It has approximatly 40 runs since complete rebuild. New rods, pistons, valves, springs, lifters. Only sprayed both systems once and ran 6.97 at 197 in a #2500 door car with a very conservative tune-up. It dynoed 1300 on Slatten's dyno and is set up for lots of nitrous. Also have (2) spare pistons and a set of push rods that come with the motor. See RacingJunk ad #2154363 Price is $21,000 and will split delivery cost to ship. This motor has been well maintained and cared for. Please call with any questions. Thank You Max Tafoya Jr. 505-280-7467 Last edited by MRT; 05-18-2011 at 10:13 AM.