Copo # 3 - Page 4

Geerhead55 · 08-04-2012, 02:11 PM

Quote:

Originally Posted by Superfan1

Are you going to enter Indy with the car?

Why wait so long?? Brainerd is next up!
Danny Durham

cambria · 08-04-2012, 02:23 PM

No one know what these cars will actually do and the CJ'S are not running stock off the showroom floor. They have 3 years of r and D and guys like Bo laying the green to them to make them fast need to pick a motor builder other than Patterson who is working the CJ'S need a Chevy big blower guy and am open for suggestions. My goal is to make this the fastest COPO 4.0 If all the CJ'S were running as delivered it would be a different story

Monte Howard · 08-04-2012, 03:03 PM

Paul, I would contact BES racing engines in Indiana.
They have made some fast guys even faster.
Parsons and Myers would also be a good pick.
I would also look into some of the premier comp eliminator engine builders.

Doug McCue · 08-04-2012, 03:08 PM

you have a pm

D.Johns · 08-04-2012, 04:14 PM

Quote:

Originally Posted by Monte Howard

Paul, I would contact BES racing engines in Indiana.
They have made some fast guys even faster.
Parsons and Myers would also be a good pick.
I would also look into some of the premier comp eliminator engine builders.

BES will be building my CJ engine. Like stated he's made fast guys faster. In the NMRA he was able to make more power with less failures to boot. The last part is the most important! Unless you've got an endless money supply(which I don't).

cambria · 08-04-2012, 06:00 PM

Quote:

Originally Posted by Doug McCue

you have a pm

No message found E mail. Pcambria@lglaw.com

boster · 08-04-2012, 10:09 PM

Paul wha wha wha , already about the Cj's. As I have told you many times , in my opinion it would be hard to find better then Patterson Racing to do any GM or 5.4 mod motor , Carbureted, Fuel Injected or Supercharged . I dont know what you're waiting for Call Allen or Todd .

"Laying the green to it " how much did you just pay ? what you going to spend ? LMAO

Jeff when can we start busting his ball's or should I say Col !!

cambria · 08-04-2012, 10:15 PM

He is building fast fords for you I want my own who wants to build fast Chevys for me if he builds mine faster than yours we would see who the whiner was I find my own who wants to be part of the big COPO tanning your *** and Foghorn leghorns too. Remember we both used to have the same engine builder same car and for some reason your car was always faster than Mine not this time Ha ha black before blue before I am through

cambria · 08-04-2012, 10:24 PM

He is building fast fords for you I want my own who wants to build fast Chevys for me if he builds mine faster than your we would see who the whiners was I find my own who wants to be part of the big COPO tanning your *** and Foghorn leghorns too. Remember we both used to have the same engine builder same car and for some reason your car was always faster not this time Ha ha black before blue before I am through

boster · 08-04-2012, 10:58 PM

The reason I shalacked your ***** in top stock the last year was Patterson built me some fast stuff and I had a good tuner . The year before I had Monty who was always worth at least a 10th and we tested.

The reason the 4L supercharged copo wont out run a 4L Supercharged CJ heads up same weight is a different , something about 4valves are better then 2

Your wallet is going to be black and blue before your thru if you go with the wrong engine builder . You name the date and place grudge race ! try and do it before
I get 2 old . I will be their and can take if you win, can you take it if you lose ?

LOL , come on Jeff get in here !! Ford vs Mopar vs Chevy

08-04-2012, 02:23 PM	#32
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 No one know what these cars will actually do and the CJ'S are not running stock off the showroom floor. They have 3 years of r and D and guys like Bo laying the green to them to make them fast need to pick a motor builder other than Patterson who is working the CJ'S need a Chevy big blower guy and am open for suggestions. My goal is to make this the fastest COPO 4.0 If all the CJ'S were running as delivered it would be a different story __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0 Last edited by cambria; 08-04-2012 at 02:25 PM.

08-04-2012, 03:03 PM	#33
Monte Howard Member Join Date: Nov 2002 Location: Potomac,IL Posts: 279 Likes: 1 Liked 71 Times in 23 Posts	Re: Copo # 3 Paul, I would contact BES racing engines in Indiana. They have made some fast guys even faster. Parsons and Myers would also be a good pick. I would also look into some of the premier comp eliminator engine builders. __________________ Monte Howard 3209 STK, 3208 SS

08-04-2012, 03:08 PM	#34
Doug McCue Member Join Date: Jun 2007 Posts: 232 Likes: 7 Liked 13 Times in 2 Posts	Re: Copo # 3 you have a pm

08-04-2012, 10:09 PM	#37
boster Senior Member Join Date: Oct 2003 Location: usa Posts: 958 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 Paul wha wha wha , already about the Cj's. As I have told you many times , in my opinion it would be hard to find better then Patterson Racing to do any GM or 5.4 mod motor , Carbureted, Fuel Injected or Supercharged . I dont know what you're waiting for Call Allen or Todd . "Laying the green to it " how much did you just pay ? what you going to spend ? LMAO Jeff when can we start busting his ball's or should I say Col !! __________________ Bo Kenney

08-04-2012, 10:15 PM	#38
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 He is building fast fords for you I want my own who wants to build fast Chevys for me if he builds mine faster than yours we would see who the whiner was I find my own who wants to be part of the big COPO tanning your *** and Foghorn leghorns too. Remember we both used to have the same engine builder same car and for some reason your car was always faster than Mine not this time Ha ha black before blue before I am through __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0 Last edited by cambria; 08-04-2012 at 10:18 PM.

08-04-2012, 10:24 PM	#39
cambria Member Join Date: Nov 2003 Location: Buffalo Posts: 235 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 He is building fast fords for you I want my own who wants to build fast Chevys for me if he builds mine faster than your we would see who the whiners was I find my own who wants to be part of the big COPO tanning your *** and Foghorn leghorns too. Remember we both used to have the same engine builder same car and for some reason your car was always faster not this time Ha ha black before blue before I am through __________________ BS/A,A/FIA 00 Camaro- CS/A, B/FIA 94 Camaro .2012 copo 4.0

08-04-2012, 10:58 PM	#40
boster Senior Member Join Date: Oct 2003 Location: usa Posts: 958 Likes: 0 Liked 0 Times in 0 Posts	Re: Copo # 3 The reason I shalacked your ***** in top stock the last year was Patterson built me some fast stuff and I had a good tuner . The year before I had Monty who was always worth at least a 10th and we tested. The reason the 4L supercharged copo wont out run a 4L Supercharged CJ heads up same weight is a different , something about 4valves are better then 2 Your wallet is going to be black and blue before your thru if you go with the wrong engine builder . You name the date and place grudge race ! try and do it before I get 2 old . I will be their and can take if you win, can you take it if you lose ? LOL , come on Jeff get in here !! Ford vs Mopar vs Chevy __________________ Bo Kenney Last edited by boster; 08-04-2012 at 11:06 PM.