Brake problem - Page 2

Eman · 01-15-2019, 12:36 AM

Did you find the problem?

Glenn Briglio · 01-15-2019, 07:47 AM

Yes master cylinder

Eman · 01-15-2019, 11:38 AM

So the MC wasn't sending as much pressure to the rear as the frt.? Are you running a replacement Mopar MC? I've got a Dorman Mopar MC on mine which is an 85 Camaro. Only thing about it I didn't like was the shallow bore where the rod goes into the piston. I modified my pedal quadrant to support the rod so it could never fall out. I've got a plate on the firewall but I do notice the firewall flexes a little too.

ss3011 · 01-15-2019, 01:14 PM

Quote:

Originally Posted by Glenn Briglio

Yes master cylinder

Did you happen to teardown the old master cylinder to figure out where the leak occurred ?

01-15-2019, 12:36 AM	#11
Eman Member Join Date: May 2014 Location: E TN Posts: 469 Likes: 16 Liked 133 Times in 76 Posts	Re: Brake problem Did you find the problem?

01-15-2019, 07:47 AM	#12
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,280 Likes: 1,889 Liked 965 Times in 306 Posts	Re: Brake problem Yes master cylinder __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.

01-15-2019, 11:38 AM	#13
Eman Member Join Date: May 2014 Location: E TN Posts: 469 Likes: 16 Liked 133 Times in 76 Posts	Re: Brake problem So the MC wasn't sending as much pressure to the rear as the frt.? Are you running a replacement Mopar MC? I've got a Dorman Mopar MC on mine which is an 85 Camaro. Only thing about it I didn't like was the shallow bore where the rod goes into the piston. I modified my pedal quadrant to support the rod so it could never fall out. I've got a plate on the firewall but I do notice the firewall flexes a little too.