Electric Water Pump damage

Lyn Smith · 07-31-2019, 08:08 PM

What is causing this damage to the inside of my electric water pump, and what can I do to stop it. I run just water in the system,and drain it in the fall.

Jeff Stout · 07-31-2019, 08:48 PM

Quote:

Originally Posted by Lyn Smith

What is causing this damage to the inside of my electric water pump, and what can I do to stop it. I run just water in the system,and drain it in the fall.

I always understood when you let air get to wet metal it still corroded. I always leave the water in. How about electrolysis?

Duane Eiskant II · 07-31-2019, 09:33 PM

Lyn run the Lucas (* it works) cooling system additive or the redline water wetter. Both are good for aluminum blocks/heads/intakes/water pumps. It won’t allow it to corrode

Dragsinger · 08-01-2019, 09:28 AM

Lyn,

Wix, #24056 cooling system treatment is also a good product and available at most auto parts stores. It is around $7.00 per quart.

FireSale · 08-01-2019, 11:45 AM

What fluid do you run in the coolant system? Tap water could have some metals that will attack aluminum. Excess acidity can corrode it to. Check the Ph level of the water you use with a test kit. I run distilled water only and drained the block and pulled the water pump to change the cam this week. Lots of rust in the water but no damage to the WP.

Eman · 08-01-2019, 12:03 PM

The debate will continue about what water to use. I do know that some coolant additives state not to use distilled water. I stick to filtered drinking water for my car.

John Dinkel · 08-01-2019, 03:08 PM

I use Red LINE.

mschafer · 08-01-2019, 05:06 PM

I use distilled water and add Zerex Super Protector[ZXC04] bought at Napa was in car for 2 years and drained it this winter to change intake, intake water ports looked like new and not sign of electrolysis also run a anode in radiator petcock fitting

Dissident · 08-01-2019, 06:47 PM

Mr. Smith and others,

IF the surface we are looking at in the pic is aluminum (ie: non-ferrous), the problem is specifically from natural electrical action to corrode the material. IF that is the case, the original surface should have been anodized so as to decrease the action but would be better to use a sacrificial anode in the cooling system as well. IF originally anodized, any scratch through the finish accelerates the problem. IF the surface is supposed to be ferrous, it is surprising that it shows no ferrous oxide (rust) residue. So, it appears to be non-ferrous.

Either way, there are no negatives to use a sacrificial anode in the cooling system. Those type anodes are available at any hardware store or at Lowes, Home Depot, etc.

Regards to All that like this kind of stuff,
HB2

Dissident

Lyn Smith · 08-01-2019, 09:38 PM

Thanks for the info everyone. Someone please post a picture of a anode.I know if I go into the H ware store and ask the lady for a anode, I will get that funny look.LOL

07-31-2019, 08:08 PM	#1
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,194 Likes: 273 Liked 950 Times in 189 Posts	Electric Water Pump damage What is causing this damage to the inside of my electric water pump, and what can I do to stop it. I run just water in the system,and drain it in the fall. Attached Thumbnails

07-31-2019, 09:33 PM	#3
Duane Eiskant II Senior Member Join Date: Dec 2001 Location: Alexandria, Va Posts: 501 Likes: 261 Liked 57 Times in 33 Posts	Re: Electric Water Pump damage Lyn run the Lucas (* it works) cooling system additive or the redline water wetter. Both are good for aluminum blocks/heads/intakes/water pumps. It won’t allow it to corrode __________________ Duane Eiskant 1354 Stock/Super Stock

08-01-2019, 09:28 AM	#4
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Electric Water Pump damage Lyn, Wix, #24056 cooling system treatment is also a good product and available at most auto parts stores. It is around $7.00 per quart. __________________ Larry Woodfin 471W

08-01-2019, 11:45 AM	#5
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Electric Water Pump damage What fluid do you run in the coolant system? Tap water could have some metals that will attack aluminum. Excess acidity can corrode it to. Check the Ph level of the water you use with a test kit. I run distilled water only and drained the block and pulled the water pump to change the cam this week. Lots of rust in the water but no damage to the WP. __________________ Dale Shearon 68 Mustang 6394

08-01-2019, 12:03 PM	#6
Eman Member Join Date: May 2014 Location: E TN Posts: 468 Likes: 16 Liked 133 Times in 76 Posts	Re: Electric Water Pump damage The debate will continue about what water to use. I do know that some coolant additives state not to use distilled water. I stick to filtered drinking water for my car.

08-01-2019, 03:08 PM	#7
John Dinkel Senior Member Join Date: Nov 2005 Location: Pinckney, Michigan Posts: 507 Likes: 397 Liked 263 Times in 68 Posts	Re: Electric Water Pump damage I use Red LINE. __________________ John Dinkel 3295 STK

08-01-2019, 05:06 PM	#8
mschafer Junior Member Join Date: Oct 2014 Posts: 44 Likes: 0 Liked 13 Times in 9 Posts	Re: Electric Water Pump damage I use distilled water and add Zerex Super Protector[ZXC04] bought at Napa was in car for 2 years and drained it this winter to change intake, intake water ports looked like new and not sign of electrolysis also run a anode in radiator petcock fitting

08-01-2019, 06:47 PM	#9
Dissident Member Join Date: Jan 2016 Location: Colorado hills Posts: 123 Likes: 11 Liked 73 Times in 36 Posts	Re: Electric Water Pump damage Mr. Smith and others, IF the surface we are looking at in the pic is aluminum (ie: non-ferrous), the problem is specifically from natural electrical action to corrode the material. IF that is the case, the original surface should have been anodized so as to decrease the action but would be better to use a sacrificial anode in the cooling system as well. IF originally anodized, any scratch through the finish accelerates the problem. IF the surface is supposed to be ferrous, it is surprising that it shows no ferrous oxide (rust) residue. So, it appears to be non-ferrous. Either way, there are no negatives to use a sacrificial anode in the cooling system. Those type anodes are available at any hardware store or at Lowes, Home Depot, etc. Regards to All that like this kind of stuff, HB2 Dissident

08-01-2019, 09:38 PM	#10
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,194 Likes: 273 Liked 950 Times in 189 Posts	Re: Electric Water Pump damage Thanks for the info everyone. Someone please post a picture of a anode.I know if I go into the H ware store and ask the lady for a anode, I will get that funny look.LOL