Problem with lash closing up - Page 4

Ed Wright · 03-09-2020, 08:17 PM

I learned to get the feel with a feeler blade, that checked correctly with my “P&G Valve Gapper. Ran no faster, showed no better on the dyno using it, than the “feeler blade” after learning that. Seems many set them too tight with feeler blades. If you found what lash runs quickest with feeler blades, there is no power to be gained, in my limited experience, using the P&G. If they are even still made & sold. Worked with mine about 1970. I don’t think I know everything, just sharing what I experienced.

ss3011 · 03-09-2020, 10:34 PM

There is a guy that is selling one of those P&G gappers on Craigslist Detroit . Says its for a 427 Ford .

I agree , seems like once you get the feel right on a feeler gauge setting lash goes pretty fast . I would be very interested in how the factory adjusted a solid lifter engines back in the early days . On hydraulics, many engines had no adjustments , like Pontiac , Oldsmobile , etc .

Ralph A Powell · 03-10-2020, 08:53 AM

Ford had go nogo feeler gauges on the FE 427 line at Dearborn Engine plant!

03-09-2020, 08:17 PM	#31
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Problem with lash closing up I learned to get the feel with a feeler blade, that checked correctly with my “P&G Valve Gapper. Ran no faster, showed no better on the dyno using it, than the “feeler blade” after learning that. Seems many set them too tight with feeler blades. If you found what lash runs quickest with feeler blades, there is no power to be gained, in my limited experience, using the P&G. If they are even still made & sold. Worked with mine about 1970. I don’t think I know everything, just sharing what I experienced. __________________ Ed Wright 4156 SS/JA

03-09-2020, 10:34 PM	#32
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 909 Likes: 70 Liked 239 Times in 114 Posts	Re: Problem with lash closing up There is a guy that is selling one of those P&G gappers on Craigslist Detroit . Says its for a 427 Ford . I agree , seems like once you get the feel right on a feeler gauge setting lash goes pretty fast . I would be very interested in how the factory adjusted a solid lifter engines back in the early days . On hydraulics, many engines had no adjustments , like Pontiac , Oldsmobile , etc .

03-10-2020, 08:53 AM	#33
Ralph A Powell Member Join Date: Oct 2017 Location: Bay City Texas Posts: 388 Likes: 2 Liked 225 Times in 136 Posts	Re: Problem with lash closing up Ford had go nogo feeler gauges on the FE 427 line at Dearborn Engine plant!