Eating Crow - Tear Down at Indy

[Jason]

Asking a question. Why did only one car fail while all the others in teardown passed the wheelbase check? A measurement of 106 3/4 on a 108 W.B. is 1 1/4 short. The rulebook allows +/- 3/4 inch. Look closely at the Video. It looks like the rear wheel is moved forward in the wheel well opening.

[Larry Hill]

Just questing but if WB is 108” it can be 107 1/4” to 108 3/4”. Everything else is wrong.

[bubski]

Originally Posted by Wyatt Wagner

They checked it with some homemade tool and a 10 cent tape measure. They measured 3 times and got a different measurement each time. Ask to take all four wheels off and measure that was to get and exact measurement. The response I got was “your still gonna get the same result. See you later”

Bubski's like OMG!! They checked your wheelbase with a stick rule with the end chopped off n a spokeshave !! then they checked it in cubits !! than finally they used a Harbor Freight tape measure with the wheels exactly where they wanted them and your hosed !!?? Bubski like thinking "what a joke " These "tech guys" should be inspecting Sizzli's at WaWa so you don't get beat for some artificial meat !!