68-72 Nova Front Suspension

Alan Roehrich · 11-16-2010, 02:31 PM

Todd,
It's positive caster that you want, that's what makes the car want to go straight, especially when you run really close to zero toe in. Yes, the shafts are a good idea, and so are the ball joints, the ball joints keep the camber a lot closer to zero, so that you don't have massive camber change during suspension travel, and that helps with bump steer, to a lesser degree.

Most of the actual racing ball joints are made by either Moog or TRW, and boxed for other "private labels". Either is a good product.

11-16-2010, 02:31 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,123 Likes: 1,581 Liked 1,874 Times in 422 Posts	Re: 68-72 Nova Front Suspension Todd, It's positive caster that you want, that's what makes the car want to go straight, especially when you run really close to zero toe in. Yes, the shafts are a good idea, and so are the ball joints, the ball joints keep the camber a lot closer to zero, so that you don't have massive camber change during suspension travel, and that helps with bump steer, to a lesser degree. Most of the actual racing ball joints are made by either Moog or TRW, and boxed for other "private labels". Either is a good product. __________________ Alan Roehrich 212A G/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode