|
![]() |
#11 | |
Member
Join Date: Jul 2012
Location: Texas
Posts: 409
Likes: 295
Liked 117 Times in 50 Posts
|
![]() Quote:
The 6R80 transmission has a 4.17 first gear. If you combine that with a 4.09 ring & pinion, that would give you a launch ratio equivalent to running a C4 with a 6.50 rear gear. I just don't think that's necessary for an engine that makes almost all of it's torque by about 2,500 rpm. The calculations I ran, had the car going through in 4th gear, which is 1.14. 5th gear is .87, and 6th gear is .69. This engine makes so much torque and has such a wide powerband, with a horsepower peak at a relatively low 5,500 rpm, I don't think it would need to use that many gears to get down the quarter mile efficiently. With a 30" tire, a 3.73 ring & pinion, and a 1.14 4th gear, the car would do just about 115 mph at 5,500 rpm through the lights. With a 28" tire and the stock Performance Package 3.55 rear end gears, it would do 113 mph at 5,500 rpm in 4th. With a 28" tire and the stock non Performance Package 3.31 rear end gears, it would do about 115 mph at about 5,300 rpm in 4th. I'd be tempted to try it with a 28" tire and the stock gearing. |
|
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|