Coil for a MSD 7AL-2

Tom Goldman · 02-24-2019, 01:54 PM

Be wary of using an old 8201 that has been just laying around.
Because they are oil cooled and insulated they can ,and do loose oil over time ,especially if laying on their side . ...This can lead to overheating or worse overloading the output drivers on the 7AL .
They are great coils and were the gold standard for MSD for years and there is certainly nothing wrong with using one ,just be careful with old ones.

02-24-2019, 01:54 PM	#11
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 893 Liked 883 Times in 237 Posts	Re: Coil for a MSD 7AL-2 Be wary of using an old 8201 that has been just laying around. Because they are oil cooled and insulated they can ,and do loose oil over time ,especially if laying on their side . ...This can lead to overheating or worse overloading the output drivers on the 7AL . They are great coils and were the gold standard for MSD for years and there is certainly nothing wrong with using one ,just be careful with old ones. __________________ Tom Goldman 1500 SG , 1506 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode