My son Tony 5.3 Chevy trouble

Robin Lawrence · 09-10-2019, 10:28 AM

When swapping these types of ECU's it's common to modify the Air Intake leading to and from the Mass Air Meter. this can change the calibration of the mass air. Depending on the ECU it can fail the mass air table and revert to the VE table. The transmission should not effect the function of the mass air meter. Transmission issues typically are incorrect harness or mis matched ECU calibration to the 4L60E.

The mass air issue can be tuned in the MAF transfer function or change the operating system to speed density and tune using the VE table.

I work for Holley so my suggestion is the Terminator X Max. About $1400 complete and has trans control.

Robin

09-10-2019, 10:28 AM	#4
Robin Lawrence Sponsor Join Date: Jan 2002 Location: Galesburg IL. Posts: 177 Likes: 255 Liked 715 Times in 120 Posts	Re: My son Tony 5.3 Chevy trouble When swapping these types of ECU's it's common to modify the Air Intake leading to and from the Mass Air Meter. this can change the calibration of the mass air. Depending on the ECU it can fail the mass air table and revert to the VE table. The transmission should not effect the function of the mass air meter. Transmission issues typically are incorrect harness or mis matched ECU calibration to the 4L60E. The mass air issue can be tuned in the MAF transfer function or change the operating system to speed density and tune using the VE table. I work for Holley so my suggestion is the Terminator X Max. About $1400 complete and has trans control. Robin __________________ STK 308 SS 3088

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode