HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-28-2009, 07:18 PM   #8
X-TECH MAN
Banned
 
Join Date: Dec 2007
Location: Lake Placid, Florida
Posts: 3,203
Likes: 1,047
Liked 235 Times in 110 Posts
Default Re: Hooking up an A Body Mopar

OK Bill......Im no pro but from what I know it is the cam that is causing the varience in boost. I would think that a cam with 112 centerline with a little more duration @ .050. Something around 230 degrees on the intale and 240 on the exhaust. The blower calms the cam down and will make it run fairly smooth. . When you go to a 402-408 inch piece you will need more cam. Larger engine needs more duration (air flow) because the cubic inches makes the cam think its smaller. The heads (Magnum) are OK but need some work. The exhaust is better (almost 30 %) than the old LA style head. Ive done quite a bit of playing with the 360 Magnum style heads in crate motored stockers and bracket cars. Also with all that instant torque it might hook better and the chassis will work better with the 4:10 gear. Im not an expert by far but just from what I have found over the years, In case a blower is not always a blower I can only say Ive worked on the DRAW THRU type and not the blow thru versions. Terry

Last edited by X-TECH MAN; 04-28-2009 at 07:23 PM.
X-TECH MAN is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.