Radial slick Q?

Myron Piatek · 11-07-2009, 05:59 PM

Hoosier lightweight radials here. They tend to take a few more lbs of air than bias ply.
No glue or screws but they can move a few inches in the first few races, then seem to settle in. I do swap tires to minimize the change and affect on balance. I run 21 lbs footbraking a 3,540+ lb IHRA Stock 360 Dart Sport.

Radials don't grow like a bias ply so the will result in higher rpms at the finish. They are also more sensitive to track conditions. So if a track is "marginal" or worse, they will not be as consistent as a bias ply. But radials do tend to be around .10 faster.

11-07-2009, 05:59 PM	#5
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Radial slick Q? Hoosier lightweight radials here. They tend to take a few more lbs of air than bias ply. No glue or screws but they can move a few inches in the first few races, then seem to settle in. I do swap tires to minimize the change and affect on balance. I run 21 lbs footbraking a 3,540+ lb IHRA Stock 360 Dart Sport. Radials don't grow like a bias ply so the will result in higher rpms at the finish. They are also more sensitive to track conditions. So if a track is "marginal" or worse, they will not be as consistent as a bias ply. But radials do tend to be around .10 faster. __________________ LOCOMOTION Racing