valve adjustment - sherman lifters

Jeff Lee · 04-09-2010, 03:57 PM

I've tried every method there is and in my opinion EOIC by hand is the only way it is accurate on a stock eliminator style cam. I am not talking about other cams, just stocker cams as they have the most radical ramps and are much more "touchy" than any other ramp there is. I just do one cylinder at a time, front to back on each bank. I don't go anymore than approximately 1/3rd valve travel or movement and then make the adjustment.

04-09-2010, 03:57 PM	#12
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: valve adjustment - sherman lifters I've tried every method there is and in my opinion EOIC by hand is the only way it is accurate on a stock eliminator style cam. I am not talking about other cams, just stocker cams as they have the most radical ramps and are much more "touchy" than any other ramp there is. I just do one cylinder at a time, front to back on each bank. I don't go anymore than approximately 1/3rd valve travel or movement and then make the adjustment. __________________ Jeff Lee 7494 D/S '70 AMX