SS/AS just a few curious questions

Jeff Lee · 05-14-2010, 12:20 AM

I've never looked at the modified classes but was reading through my 2009 printed copy of the rulebook and took a peak.
For SS/AS I see most of the engines are in the 390 inch range. Are these small blocks or big blocks? What is a "typical" GM / Mopar or Ford SS/AS engine like? Compression, bore / stroke, rods, blocks, etc. What about the heads, what is common and what kind of flow is typical. I assume it's pretty big bucks with aftermarket blocks to start with.
SS/BS and SS/CS seems to be equivalent just with small blocks with 750's. Right?

Just curious...

05-14-2010, 12:20 AM	#1
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	SS/AS just a few curious questions I've never looked at the modified classes but was reading through my 2009 printed copy of the rulebook and took a peak. For SS/AS I see most of the engines are in the 390 inch range. Are these small blocks or big blocks? What is a "typical" GM / Mopar or Ford SS/AS engine like? Compression, bore / stroke, rods, blocks, etc. What about the heads, what is common and what kind of flow is typical. I assume it's pretty big bucks with aftermarket blocks to start with. SS/BS and SS/CS seems to be equivalent just with small blocks with 750's. Right? Just curious... __________________ Jeff Lee 7494 D/S '70 AMX