5.0 stockers/ distributors

Tim Ellis · 07-28-2012, 03:52 PM

I believe they are, both the same C609 is stamped on the cam sprocket. I think the problem may have come from the fact that I used a thin washer between the cam sprocket and the thrust plate, it must have come with the T set. I think it ate away at the back of the sprocket. You can see its been shaved down quite a bit. The cam end play with Tset from garage is .006 +-, the one on the car had .09, not .009, but .09! Yikes!

07-28-2012, 03:52 PM	#25
Tim Ellis Member Join Date: Dec 2004 Location: Beavercreek Or. Posts: 272 Likes: 31 Liked 7 Times in 6 Posts	Re: 5.0 stockers/ distributors I believe they are, both the same C609 is stamped on the cam sprocket. I think the problem may have come from the fact that I used a thin washer between the cam sprocket and the thrust plate, it must have come with the T set. I think it ate away at the back of the sprocket. You can see its been shaved down quite a bit. The cam end play with Tset from garage is .006 +-, the one on the car had .09, not .009, but .09! Yikes! Last edited by Tim Ellis; 07-28-2012 at 05:25 PM.