Strange Engineering Master Cylinder

Richard Grant · 05-08-2013, 08:41 AM

I would check your petal ratio. Don't assume anything without checking it. If the petal ration is correct, then to be absolutly sure on the master call Strange and ask them for the part number for a 7/8's inch drum brake manuel master.
If you can afford to, go ahead and change to 4 wheel disk. You will be glad that you did down the road. You can't properly drive the top end with drum brakes, plus the weight savings, etc. You won't have to purchase a second master later either. The disk need a 11/16 to 1 1/8 inch master.
I run Areospace disk and they work well for the price.
When you get your brake pressure guage you will learn a lot about your bakes and if they are working properly. Again check everything, don't assume anything. LOL

05-08-2013, 08:41 AM	#14
Richard Grant Member Join Date: Jan 2002 Location: West Monroe, La. Posts: 301 Likes: 9 Liked 13 Times in 7 Posts	Re: Strange Engineering Master Cylinder I would check your petal ratio. Don't assume anything without checking it. If the petal ration is correct, then to be absolutly sure on the master call Strange and ask them for the part number for a 7/8's inch drum brake manuel master. If you can afford to, go ahead and change to 4 wheel disk. You will be glad that you did down the road. You can't properly drive the top end with drum brakes, plus the weight savings, etc. You won't have to purchase a second master later either. The disk need a 11/16 to 1 1/8 inch master. I run Areospace disk and they work well for the price. When you get your brake pressure guage you will learn a lot about your bakes and if they are working properly. Again check everything, don't assume anything. LOL __________________ Richard Grant 4988 STK