Strange MSD Digital 2-step issue

buzzinhalfdozen · 06-11-2013, 08:32 PM

Ken, you said you tested the 2 step, but did you actually put in on the rev limiter or just observe the light? Also do you have or have access to an MSD ignition tester? If you do try "running" it with the tester while working the 2 step switch, which I'll assume you have on the clutch pedal or linkage? Could it be possible you're "going past" the switch on the starting line, most guys seem to give a lot of leg to the pedal after they've fully staged. As Lew stated may be a good idea to make sure you're actually getting power to the input wire. Good luck Joe

06-11-2013, 08:32 PM	#6
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Strange MSD Digital 2-step issue Ken, you said you tested the 2 step, but did you actually put in on the rev limiter or just observe the light? Also do you have or have access to an MSD ignition tester? If you do try "running" it with the tester while working the 2 step switch, which I'll assume you have on the clutch pedal or linkage? Could it be possible you're "going past" the switch on the starting line, most guys seem to give a lot of leg to the pedal after they've fully staged. As Lew stated may be a good idea to make sure you're actually getting power to the input wire. Good luck Joe __________________ Joe Buchanan SS/BX 3117 Last edited by buzzinhalfdozen; 06-11-2013 at 08:35 PM.