Front end rise

STR001 · 03-14-2015, 11:54 PM

Just an update: I took the front moroso springs out of the car today so that I can cut another coil out to get the ride height correct. I noticed that the lower control arm bushings seems to be binding. These are new polyurethane bushings and seem to be thicker than the stock rubber ones. I cut the bushings down some to give some added clearance. It looks like there is no resistance issues that I can tell. So hopefully this help solve the front end rise issue. Thanks for all the help and suggestions. Jason

03-14-2015, 11:54 PM	#11
STR001 Junior Member Join Date: Jan 2012 Location: Claxton, Georgia Posts: 55 Likes: 0 Liked 0 Times in 0 Posts	Re: Front end rise Just an update: I took the front moroso springs out of the car today so that I can cut another coil out to get the ride height correct. I noticed that the lower control arm bushings seems to be binding. These are new polyurethane bushings and seem to be thicker than the stock rubber ones. I cut the bushings down some to give some added clearance. It looks like there is no resistance issues that I can tell. So hopefully this help solve the front end rise issue. Thanks for all the help and suggestions. Jason