Ladder bar tuning / adjusting

Dragsinger · 04-20-2017, 03:42 PM

some more information to consider;

*this Monte Carlo is 3155 pounds with driver
*408 CI SBC
*powerglide
*footbrake
*31 x 13 radial tire

*The ladder bar is 32" center of rear axle to center of the front rod end. It is 2 degrees down in relation to the ground in this photo.The right ladder bar has one-half flat pre-load

It also has an anti-roll bar that is set neutral.

This car is excellent, consistent, and predictable. It runs 6.0's 1/8 mile

04-20-2017, 03:42 PM	#20
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Ladder bar tuning / adjusting some more information to consider; this Monte Carlo is 3155 pounds with driver 408 CI SBC powerglide footbrake 31 x 13 radial tire The ladder bar is 32" center of rear axle to center of the front rod end. It is 2 degrees down in relation to the ground in this photo.The right ladder bar has one-half flat pre-load It also has an anti-roll bar that is set neutral. This car is excellent, consistent, and predictable. It runs 6.0's 1/8 mile Attached Thumbnails __________________ Larry Woodfin 471W