Question about firewall.

Mark Yacavone · 06-12-2017, 12:12 PM

David, It really depends on what kind of finish and look you are trying to achieve.
As Larry said, you'd probably want to fill and grind from the engine side.
For a quickie, you could make one patch panel that would cover the heater hole and surrounding small holes, all in one shot. Pop rivet it on from the front. A couple of 1/4 -20 bolts and flat washers for the remaining holes , a can of Krylon semi, and you could be done in an hour. All up to you.

06-12-2017, 12:12 PM	#4
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,816 Likes: 2,906 Liked 5,121 Times in 1,952 Posts	Re: Question about firewall. David, It really depends on what kind of finish and look you are trying to achieve. As Larry said, you'd probably want to fill and grind from the engine side. For a quickie, you could make one patch panel that would cover the heater hole and surrounding small holes, all in one shot. Pop rivet it on from the front. A couple of 1/4 -20 bolts and flat washers for the remaining holes , a can of Krylon semi, and you could be done in an hour. All up to you. __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers