Trans shields for 2018

Kris Kristofferson · 02-16-2018, 12:07 PM

Yes, I tried to phone the company (which in located in Florida I think) to directly order a shield and they were delayed quite a bit with production due to a lack of material. I am unsure how they are doing today.

I ended up buying a used CSR shield locally and it actually fit well on my TH-400 with a stock Monte floor. The trans was already out which made the install much better. I also used a Lokar flexible dipstick (which can have the certified locking end) which helped a lot and have also "hole sawed" some bellhousing acess holes (with covers in the firewall) to make installing the bellhousing bolts much easier..

I am just a bracket guy but hopefully this can help other guys..

02-16-2018, 12:07 PM	#18
Kris Kristofferson Junior Member Join Date: Nov 2009 Location: Ottawa, Ont Posts: 68 Likes: 1 Liked 0 Times in 0 Posts	Re: Trans shields for 2018 Yes, I tried to phone the company (which in located in Florida I think) to directly order a shield and they were delayed quite a bit with production due to a lack of material. I am unsure how they are doing today. I ended up buying a used CSR shield locally and it actually fit well on my TH-400 with a stock Monte floor. The trans was already out which made the install much better. I also used a Lokar flexible dipstick (which can have the certified locking end) which helped a lot and have also "hole sawed" some bellhousing acess holes (with covers in the firewall) to make installing the bellhousing bolts much easier.. I am just a bracket guy but hopefully this can help other guys.. __________________ http://www.youtube.com/watch?v=h2qQX4TDTVU