|
|
09-03-2018, 09:53 PM
|
#2 |
|
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 709
Likes: 2,659
Liked 238 Times in 111 Posts
|
Re: Solid lifters in Stock
Myself, I have just switched lifters. BUT, the pattern on the cam had to appear normal, I lubed the lifters just like installing a new cam. Put break in oil in the pan. Set lash and ran it for a Half hour at 2500. With a hydraulic cam there are no clearance ramps ground into it so I run lash tighter than usual. (under .010)
__________________
Dave Noll, EF/S ,?/SA 6526 Last edited by Dave Noll; 09-04-2018 at 05:34 PM. |
|
|
|
|
Threaded Mode