Quick release steering wheel

[rallye bob]

Originally Posted by Tom Goldman

While there are direct bolt on hubs available for various Ford and GM columns ,I don't know of any that fit the earlier Mopar splines.
I would replace the stock shaft with a .065"x .750" chromemoly shaft and replace the stock bearings in the tube with a nylon bushing.
By using the 3/4" shaft you can choose from dozens of quick release hubs.
Borgeson has couplers for just about any steering box or you could machine the trunion shaft to fit the 3/4" tube.

Tom; Can you send me in the right direction for these direct bolt on hubs available for various Ford and GM columns? I have a '70 Olds Cutlass, and would like to keep the stock column/steering wheel with a quick release.. Thanks for any info...
Bob