|
|
02-12-2019, 02:41 PM
|
#8 |
|
Senior Member
Join Date: Sep 2007
Location: Henderson, NV
Posts: 583
Likes: 8
Liked 54 Times in 27 Posts
|
Re: Bellhousing alignment
I would play some more, such as moving .004 vertically and slightly to the side. I was able after some tries to get within .001" out after starting somewhere near where you are now. Be sure you tighten the mounting bolts starting at the bottom ones which are closest to being in line with the crank centerline.
|
|
|
|
|
Threaded Mode