Ford BB 460 Super Stock or ?

John Cannata · 05-20-2019, 10:59 PM

Asking $5,500 or BO

Don't need a Super Stock Engine, put a Holley carb on it and bracket race it.

This engine will make 700HP under 7,000rpm and over 600lbft of torque.
This is a low maintenance, very dependable engine. The reason for selling it is I changed the car over to a small block.

Best ET. 9.45 at 139mph in 3035lbs 1985 Mustang GT

1974 460cid 220hp NHRA rated at 300hp

Set NHRA National Record at 1.05 under the 10.50 index in 2013

D3VE-A2A Cylinder heads ported by Jacques Blais

Edelebrock Victor intake port matched to heads

Wilson spacer to Thermoquad carb

Danny Bee Belt Drive

Custom Comp Cams solid roller cam
.796 lift, 274/280@ .050 duration

Crower bushing lifters,

Jessel rockers,

7/16 double taper pushrods

Manley Sever Duty valves, PAC springs

Block 460 + .040 partially filled

Block has roller cam bearings and bronze lifter bushings

Eagle rods with JE pistons

ATI damper, MSD crank trigger, MSD billet distributor

Custom aluminum Moroso oil pan for Fox body Mustang

Sheet metal valve covers

This engine was run last year at the Division 1 Atco National Open and Maple Grove Points meet. Went -.806 at Atco and -.741 at Maple Grove

Link to Racing Junk ad for pictures:

https://www.racingjunk.com/BBF-compl...ag-Engine.html

Also have:

1 Edelbrock NHRA legal aluminum head part number 60687-- $350

1 set of NHRA legal ported D3VE-A2A heads with matching intake and Comp custom roller cam--$1500

1 Block 1/2 filled, .060 over--$200

1 set of BBC Childs & Albert(427-07B) NHRA Accepted 460 Ford Rods--$100

1 set of 429 Ford Cobra Jet rods--$100

ATI Flex Plate 915700w/adapter cert good to 2020--$75

JW Ultra Bell to C-4 trans. cert good to 2022--$250

Contact: John 860-918-2524

05-20-2019, 10:59 PM	#1
John Cannata Junior Member Join Date: Jun 2011 Location: Central Ct. Posts: 12 Likes: 1 Liked 6 Times in 3 Posts	Ford BB 460 Super Stock or ? Asking $5,500 or BO Don't need a Super Stock Engine, put a Holley carb on it and bracket race it. This engine will make 700HP under 7,000rpm and over 600lbft of torque. This is a low maintenance, very dependable engine. The reason for selling it is I changed the car over to a small block. Best ET. 9.45 at 139mph in 3035lbs 1985 Mustang GT 1974 460cid 220hp NHRA rated at 300hp Set NHRA National Record at 1.05 under the 10.50 index in 2013 D3VE-A2A Cylinder heads ported by Jacques Blais Edelebrock Victor intake port matched to heads Wilson spacer to Thermoquad carb Danny Bee Belt Drive Custom Comp Cams solid roller cam .796 lift, 274/280@ .050 duration Crower bushing lifters, Jessel rockers, 7/16 double taper pushrods Manley Sever Duty valves, PAC springs Block 460 + .040 partially filled Block has roller cam bearings and bronze lifter bushings Eagle rods with JE pistons ATI damper, MSD crank trigger, MSD billet distributor Custom aluminum Moroso oil pan for Fox body Mustang Sheet metal valve covers This engine was run last year at the Division 1 Atco National Open and Maple Grove Points meet. Went -.806 at Atco and -.741 at Maple Grove Link to Racing Junk ad for pictures: https://www.racingjunk.com/BBF-compl...ag-Engine.html Also have: 1 Edelbrock NHRA legal aluminum head part number 60687-- $350 1 set of NHRA legal ported D3VE-A2A heads with matching intake and Comp custom roller cam--$1500 1 Block 1/2 filled, .060 over--$200 1 set of BBC Childs & Albert(427-07B) NHRA Accepted 460 Ford Rods--$100 1 set of 429 Ford Cobra Jet rods--$100 ATI Flex Plate 915700w/adapter cert good to 2020--$75 JW Ultra Bell to C-4 trans. cert good to 2022--$250 Contact: John 860-918-2524