Fox Mustang stocker wheel questions

Doug Hoven · 12-22-2022, 04:08 PM

There are foxbody stockers out there with 30x9 tires on them, but if you want to retain the factory width of an 8.8, I would go with a 28x9. Not sure on the backspacing. As far as rear suspension, I believe a set of aftermarket lower arms (I have BBKs on my street car), and a set of adjustable upper arms would be a good start. I don't believe you are allowed adjustable lower arms in stock. Some have used an air bag in the right rear, but a good antiroll bar set up works very well too.

12-22-2022, 04:08 PM	#2
Doug Hoven Member Join Date: Feb 2018 Location: Jersey Posts: 212 Likes: 191 Liked 855 Times in 164 Posts	Re: Fox Mustang stocker wheel questions There are foxbody stockers out there with 30x9 tires on them, but if you want to retain the factory width of an 8.8, I would go with a 28x9. Not sure on the backspacing. As far as rear suspension, I believe a set of aftermarket lower arms (I have BBKs on my street car), and a set of adjustable upper arms would be a good start. I don't believe you are allowed adjustable lower arms in stock. Some have used an air bag in the right rear, but a good antiroll bar set up works very well too. __________________ 1189 F/SA Defunzalo Racing Enterprises