4 cylinder cars?

[Rob Lloyd]

Originally Posted by Sean Kennedy

It looks like minivan might be gone...

So can yo experts out there tell me what various models the turbos came in? The omnis and any of the other shelby branded models are nearly impossible to find and going up in value, so i would like to find a dodge branded turbo car.

'89 Dodge Aries 2-door with a 2.5 Turbo engine might be a contender for A/FS. Light body, same engine/trans as the Minvans, Daytonas, etc.

[art leong]

Originally Posted by Rob Lloyd

'89 Dodge Aries 2-door with a 2.5 Turbo engine might be a contender for A/FS. Light body, same engine/trans as the Minvans, Daytonas, etc.

I would stay away from A the SRT4's run that class.
The turbo's don't care much about weight. And the 2.5 is no match for them.

[Rob Lloyd]

Originally Posted by art leong

I would stay away from A the SRT4's run that class.
The turbo's don't care much about weight. And the 2.5 is no match for them.

I dunno - if you could get an Aries/Reliant down to min weight, I bet you'd be able to run low 13's. Of course, the SRT's have run 12.9 before.

The only other car that might give an SRT a run in A/FS would be the '86 T2 GLHS.

[Sean Haning]

Originally Posted by Rob Lloyd

I dunno - if you could get an Aries/Reliant down to min weight, I bet you'd be able to run low 13's. Of course, the SRT's have run 12.9 before.

The only other car that might give an SRT a run in A/FS would be the '86 T2 GLHS.

Aries/Reliants never came from Chrysler with turbo motors to my knowledge. Also Marcus86GLHS has had his car in the 12.9x range with what he told me was a stock Garrett and no porting. A custom cal, +20's, 3" exhaust, and drag radials. Probably not legal weight and on pump gas, but it can get there I'm sure. It will be interesting to see where my "S" car ends up when finished. Reaching minimum weight won't be a problem. I'm also pretty confident the SRT's aren't showing their full hand. If the AEM is a legal setup in the car, or the use of SCT, those cars should be good for mid 12's, IMO.

[Rob Lloyd]

Originally Posted by Sean Haning

Aries/Reliants never came from Chrysler with turbo motors to my knowledge. Also Marcus86GLHS has had his car in the 12.9x range with what he told me was a stock Garrett and no porting. A custom cal, +20's, 3" exhaust, and drag radials. Probably not legal weight and on pump gas, but it can get there I'm sure. It will be interesting to see where my "S" car ends up when finished. Reaching minimum weight won't be a problem. I'm also pretty confident the SRT's aren't showing their full hand. If the AEM is a legal setup in the car, or the use of SCT, those cars should be good for mid 12's, IMO.

1989 Dodge Class Guide has the 2-door Aries with the (unfactored) 2.5 T1 engine in it as a 15.33 lb/hp car. That would make it a fairly heavy A/FS car. But, still an interesting combo.

[art leong]

Originally Posted by Rob Lloyd

1989 Dodge Class Guide has the 2-door Aries with the (unfactored) 2.5 T1 engine in it as a 15.33 lb/hp car. That would make it a fairly heavy A/FS car. But, still an interesting combo.

That car is carrying 165 hp not the stock 150. If someone gets serious with an SRT4 It will (has) run high 11's. The 2.5 motor is all over at about 5300. The SRT 4 can make power past 8000 it has 4 valves per hole. The stock rules allow a cam of .430 lift The cam I'm running now has .433 (modified motor)You put a cam an a good ecu in one. It would fly.

[DonatoEng]

Rob,
You forgot my Daytona from the list.

I would look at a PT turbo with a plastic intake not the aluminum one with an auto trans.