Adjustable front struts for Mustang who's to run?

[buzzinhalfdozen]

Run the Alum. bodied single Qa1's on my Edge mustang, work fine and shed a few pounds off the nose. Joe

[Chris1529]

in my experience, the adjustable struts only fit an 87-up. They have larger front brakes and different spindles from the 79-86. The QA1's wouldn't fit my 84 model and Strange only lists their adjustable units for 87-up.

[John Quinn]

Originally Posted by Chris1529

in my experience, the adjustable struts only fit an 87-up. They have larger front brakes and different spindles from the 79-86. The QA1's wouldn't fit my 84 model and Strange only lists their adjustable units for 87-up.

I am building my 85 using 94-95 spindles so that the 87 and up struts will fit. I have also been told those spindles will improve the handling. The spindles are a bolt in upgrade but need some minor accessories if you retain the old style struts. I believe a different tie rod emd is also used, I am at work and don't have the info at hand.
It is such a common swap that Late Model Restoration even has a kit.

http://www.latemodelrestoration.com/...1&comp=LRSeven

[Chris1529]

My car is a GT 350. I had to put a ball joint on it last spring before I left for Mooresville.
I got one for an 84 GT and it did not fit. I went back and asked for one for an 84 SVO and it fit.
My car, being a 20th anniversary model, must have a conglomeration of parts, but the adjustable struts still did not fit.
Chris Alstons chassis works also makes a double adjustable strut for the fox body cars.

I have run lakewoods on my car for 10 years.

[Sean Marconette]

Santuff if you have more money than you know what to do with, or QA-1's if you want the most bang for the buck. Works on my car.

Sean

[west coast]

Thanks everybody for the input. Still doing research don't have enough money for the Santuff or the Varistruts. The QA1 looks very good and shaves a few pounds off the front. Still have lots of work to do before the first race in May to the 90 Mustang. All ready aquired the Moroso front springs.

Wheels up everybody

[Rory McNeil]

Originally Posted by west coast

Thanks everybody for the input. Still doing research don't have enough money for the Santuff or the Varistruts. The QA1 looks very good and shaves a few pounds off the front. Still have lots of work to do before the first race in May to the 90 Mustang. All ready aquired the Moroso front springs.

Wheels up everybody

Let us know how you make out installing those Moroso front coils in your Mustang. I have a pair that I`d like to install in my car, but you can`t use a normal coil spring compressor on a FOX Mustang, and they are so long that I`ve never had any luck installing them by letting the lower control arms hang from the inner pivots. Anybody ever install these springs (uncut) in a FOX without using the factory type Ford spring compressor?