|
![]() |
#5 |
Member
Join Date: Oct 2008
Posts: 168
Likes: 0
Liked 1 Time in 1 Post
|
![]()
How much HP would a 3650 chevelle have at the engine as a guess with the following ET's and driveline
3650 chevelle race weight 327 small block Spun hard so we leave from an idle and spins hard from an idle just not as bad,, anyways here is some ET info 60' 1.765 (spun through low gear) 1/8 7.49 @94.93mph 1/4 11.645 @118.98mph but lifted before lights Next best pass which was a little too wild (which we think was the track) 60' 1.62 (leaving 3600rpm off t-brake and 35-40' out went to the left out of groove and had to be pulled in) 1/4 11.70 @117.56mph (on and off throttle 3 times, last was lifted car length or so before lights) I need to figure out the suspension and the walking in the groove,,,, our other car walked in the groove too but with a 32x14.5W it felt fine. The Chevelle on 8.6" tread is not fun Im looking at maybe putting a radial on it,, How will a radial hook leaving off the transbrake ? Any tricks to radials ? I see alot of race cars going to Mickey Thompson ET Street Radials on 100% drag cars, i watched a mustand go 1.28 60' on a pair of 275/60 15's Here is a video of the 11.645 @118.98mph pass http://s510.photobucket.com/albums/s...t=MVI_0362.flv Thoughts ? |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|