|
|
03-27-2009, 08:00 PM
|
#12 |
|
Junior Member
Join Date: Nov 2005
Location: silvis ill
Posts: 40
Likes: 0
Liked 0 Times in 0 Posts
|
Re: cam degreeing help
Mark,Tried the one tooth off, did not help.Had degree bushing set at zero. Checked my degree wheel readings, first reading was 56 went to other reading it was164, total is220 divided is 110, same as all my readings. Never had a problem degreeing before.
__________________
Terry Waldron 5619 K/S |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode