Drop Per Coil Removed on Moroso Trick Springs

cad · 04-08-2009, 10:24 PM

Quote:

Originally Posted by Mike Pearson

Chad,

I had the same issue with the Moroso springs in my Camaro. Too tall to even get in place. I cut 1 full coil off and they worked good. Custom springs would be the way to go but that process takes more time.

I did the same thing on my 68 Camaro. I have about 3/4-1" of space to the snubbers now. I bought the lightest, small block springs. It's pretty low in the front and now should have about 5" of upward travel.
Clark

Bud Lefevre · 04-09-2009, 11:19 PM

make sure you fill all the fluids too before you get to carried away.

Chad E532 · 04-11-2009, 09:19 PM

Well I went for it and cut a full coil out of the springs and reinstalled.
After sitting overnight the ride height is exactly where I wanted it to end up.
Thanks to everyone who helped me out.
Chad

04-09-2009, 11:19 PM	#2
Bud Lefevre Member Join Date: Mar 2002 Location: Toledo, Ohio Posts: 250 Likes: 0 Liked 0 Times in 0 Posts	Re: Drop Per Coil Removed on Moroso Trick Springs make sure you fill all the fluids too before you get to carried away. __________________ Bud Lefevre 3075 STK IHRA World Record Holder

04-11-2009, 09:19 PM	#3
Chad E532 Member Join Date: Jul 2008 Location: Lindstrom MN Posts: 156 Likes: 7 Liked 54 Times in 7 Posts	Re: Drop Per Coil Removed on Moroso Trick Springs Well I went for it and cut a full coil out of the springs and reinstalled. After sitting overnight the ride height is exactly where I wanted it to end up. Thanks to everyone who helped me out. Chad

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode