|
|
![]() |
#1 |
Member
Join Date: May 2008
Location: Disputanta Va (30 minutes from VMP)
Posts: 122
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
You can get more shock travel by raising the bottem shock mts then backing off the springs to get the ride heigth where you want it. You can also trim the shock bumpers to increase travel.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Apr 2008
Location: east hartford ct.
Posts: 539
Likes: 0
Liked 9 Times in 3 Posts
|
![]()
you will need to adjust the ladder bar . you can wind the spring up all you want and it's not gonna change much . ladder bars don't allow the rear roll like a 4-link would. i would check to see if there is preload on the bar now . just loosen the front bolt on the pass side and with your weight in the car see if it moves freely. i'll bet it out of adjustment and is holding that side down.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|