|
|
![]() |
#1 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 984
Likes: 0
Liked 11 Times in 8 Posts
|
![]()
Quick way to check for plugged idle air bleed run the adj. screw in if no change in idle spped someting is restricting the circuit. Had this on a SS car at indy took carb apart to inspect, cleaned out never did see anything but after reass. carb problem was gone. Joe
__________________
Joe Buchanan SS/BX 3117 |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Apr 2007
Location: columbus ohio
Posts: 44
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
make sure your idle air screws are about 1 1/2 turns out from fully closed, and then put a bigger front squirter in the thing, you should be ok then
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2007
Posts: 320
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I go with bigger squirters
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|