cam swap

greg fulk · 07-01-2009, 06:42 PM

You can use it... but like you said a lot less lift the int alone going from 1.7 to 1.5 goes from 840 to 741! ouch!!

mike raddish · 07-02-2009, 10:22 AM

Greg: the intake rocker ratio is 1.6. The ex is 1.5. Just curious about the valve timing. I'm trying to sell this cam to someone who might be running both 1.7 ratio rockers. I have a raised cam block now so this cam wouldn't work for me. My friend has the 1.6-1.5 rocker system and i was checking to see if this cam would work in his motor.

07-01-2009, 06:42 PM	#1
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: cam swap You can use it... but like you said a lot less lift the int alone going from 1.7 to 1.5 goes from 840 to 741! ouch!! __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

07-02-2009, 10:22 AM	#2
mike raddish Junior Member Join Date: May 2006 Location: mogadore Posts: 43 Likes: 0 Liked 0 Times in 0 Posts	Re: cam swap Greg: the intake rocker ratio is 1.6. The ex is 1.5. Just curious about the valve timing. I'm trying to sell this cam to someone who might be running both 1.7 ratio rockers. I have a raised cam block now so this cam wouldn't work for me. My friend has the 1.6-1.5 rocker system and i was checking to see if this cam would work in his motor.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode