OLD Centerline wheel center cap removal

bill dedman · 07-01-2009, 06:46 PM

Ken,

Thanks for that information. Apparently, I have the same identcal cap setup that you had, because when I did as you suggested, it popped right out... of the front.

The "coat-of-arms" logo is there, too... just like you described!!!

Thanks loads for that good information.

Problem solved!!!

I owe you one, Ken...

Bill

Tom keedle · 07-01-2009, 08:24 PM

i'm surprised they didn't just fall off.
mine always did until i used some rtv on 'em.....

btw, telstar centercaps will slide in from the back and stay put if you're wanting to go that way...

bill dedman · 07-01-2009, 08:33 PM

These are a pretty snug fit; took a pretty good push to get them dislodged, so I think I'll stck with them, for now.
Thanks for the info, though.... I'll try to remember that, Tom.
Bill.

Philip Saran · 07-01-2009, 10:22 PM

The Weld wheels on the front of my Duster has new caps on it.
They go in from the back, one slides on easy, the other had to
be hammered in.

Ken Haase · 07-02-2009, 12:52 AM

You're welcome Bill. It just dawned on me what that creature is called. I think it's referred to as a 'griffin'.

bill dedman · 07-02-2009, 02:16 AM

Okay.... I'll buy that!!!

07-01-2009, 06:46 PM	#1
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: OLD Centerline wheel center cap removal Ken, Thanks for that information. Apparently, I have the same identcal cap setup that you had, because when I did as you suggested, it popped right out... of the front. The "coat-of-arms" logo is there, too... just like you described!!! Thanks loads for that good information. Problem solved!!! I owe you one, Ken... Bill __________________ Bill

07-01-2009, 08:24 PM	#2
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: OLD Centerline wheel center cap removal i'm surprised they didn't just fall off. mine always did until i used some rtv on 'em..... btw, telstar centercaps will slide in from the back and stay put if you're wanting to go that way...

07-01-2009, 08:33 PM	#3
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: OLD Centerline wheel center cap removal These are a pretty snug fit; took a pretty good push to get them dislodged, so I think I'll stck with them, for now. Thanks for the info, though.... I'll try to remember that, Tom. Bill. __________________ Bill

07-01-2009, 10:22 PM	#4
Philip Saran Senior Member Join Date: Oct 2006 Location: Parker, CO. Posts: 728 Likes: 168 Liked 14 Times in 11 Posts	Re: OLD Centerline wheel center cap removal The Weld wheels on the front of my Duster has new caps on it. They go in from the back, one slides on easy, the other had to be hammered in. __________________ Phil Saran Parker, Colorado

07-02-2009, 12:52 AM	#5
Ken Haase Member Join Date: Mar 2007 Posts: 233 Likes: 0 Liked 1 Time in 1 Post	Re: OLD Centerline wheel center cap removal You're welcome Bill. It just dawned on me what that creature is called. I think it's referred to as a 'griffin'.

07-02-2009, 02:16 AM	#6
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: OLD Centerline wheel center cap removal Okay.... I'll buy that!!! __________________ Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode