All the talk about rules.....

[Chris Williams]

Originally Posted by 63corvette

I posted this last night and received a call on the phone about the stack and asked for pictures.

Great, helps a lot. Do you attach it to the generator somehow?

[Ed Fernandez]

Originally Posted by Chris Williams

Great, helps a lot. Do you attach it to the generator somehow?

By looking at the pics it looks like it just sits at the opening of the muffler/arrester.I
would say if that tin was attached to the gen it would sound like a skeleton dancing on a tin roof.
It's a neat solution though.Nice engineering.

[63corvette]

Originally Posted by Chris Williams

Great, helps a lot. Do you attach it to the generator somehow?

It just sits on the handle and hangs from the top bracket at the top of the trailer.
The bottom of the box has a piece of alum sheet metal pop riveted to the bottom that hangs over the handle on the generator. If you look at the bottom picture from the side you can see the lip that hangs down.
The box itself has a gap of a half of an inch or so all around and pulls a little cool air in as the generator runs. The generator hardly moves even when running and has worked well for me for the two years I have run it.
The only problem I have had with it is the top bracket came loose as I mentioned in the post but a pop rivet to the stainless hose clamp fixed that.
Thanks for the comments on the engineering. Being retired I have time to tinker sometimes and this project was one of those times.