|
|
03-31-2010, 05:06 PM
|
#5 |
|
Member
Join Date: Jun 2002
Posts: 104
Likes: 2
Liked 18 Times in 4 Posts
|
Re: Mild Steel vs. Chrome Moly Tubing
Also consider the MS can be welded with a MIG and the CM must be TIG welded which is more difficult and expensive.
Someone mentioned 1 5/8 CM was their choice. If you are doing a roll bar it must be 1 3/4 inch. 1 5/8 is reserved for roll cages.
__________________
Bryan Broaddus 7568 STK ,SS |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode